FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-18

PDF page 1121 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1121
AC 27-1B · Apdx A-18Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                                  2/12/03

                                      (MANUAL IDENTIFICATION)
                        CHAPTER 1
                   INTRODUCTION (continued)

   b. The applicant should include in their ICA the information necessary to service, maintain,
and inspect the rotorcraft, its engines, rotors, and appliances, in an airworthy condition and
ensure they meet type design. Appendix A to FAR/JAR Part 27 specifies minimum requirements.
The applicant determines the information essential to the continued airworthiness.

   c. The information essential to the continued airworthiness of the rotorcraft its engines,
rotors and appliances could be contained in the applicant’s ICA, engine ICA, appliance ICA or
other applicant-associated publications, i.e., overhaul manuals, illustrated parts catalog, or
flight manual. Those ICA’s and associated publications that are listed in the applicant’s List of
Applicable Publications (LOAP) constitute the information essential for continued airworthiness
for that rotorcraft, its engines, rotors, and appliances or that TDC. The LOAP is contained in
the Introduction section of the applicant’s ICA. The LOAP should contain one of the following
statements: “The publications listed in the LOAP constitute the information essential for
continued airworthiness for the rotorcraft” or “The publications listed in the LOAP constitute the
information essential for continued airworthiness for the TDC.”

19. REFERENCED INFORMATION
   a. Appendix A to FAR/JAR Part 27 allows an applicant to refer to an accessory,
      instrument, or equipment manufacturer as the source of this information if the
      applicant shows that the item has an exceptional high degree of complexity requiring
      specialized maintenance techniques, test equipment, or expertise.

   b. When the applicant has shown that the accessory, instrument, or equipment meets the
requirements of 19a above, the manufacturer’s information could be referred to as the source of
the information. The information refers to those specified in Appendix A, Section A27.3,
Contents, Paragraph (b)(1). The applicant has responsibility for securing authorization to use
that information in their ICA.

   c. The information is limited to scheduling for each of the accessories, instruments, and
equipment that provides the recommended periods at which they should be cleaned, inspected,
adjusted, tested, and lubricated. In addition, they could be the source of information for the
degree of inspection, applicable wear tolerances, and work recommended at these periods.

   d. The FAR/JAR allows an applicant to refer to Engine ICA and Appliance ICA, which are
FAA/AUTHORITY-accepted, and the applicant’s associated publications in the applicant’s ICA.
See Introduction Section, Paragraph’s 15, 16, and 17.

   e. Any ICA or associated publications referenced in the applicant’s ICA should be submitted
with the applicant’s ICA.

REVISION:                                         (PAGE NUMBER)
Revision 4                                                        01-00-00  Page 6


Page Apdx A - 18

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →