FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-20

PDF page 1123 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1123
AC 27-1B · Apdx A-20Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                                  2/12/03

                                      (MANUAL IDENTIFICATION)
                        CHAPTER 1
                       INTRODUCTION
                                    (Continued)

22. CORRECTIONS TO ORIGINAL INSTRUCTIONS FOR CONTINUED AIRWORTHINESS

   a. Any correction made to Draft Instructions for Continued Airworthiness prior to
FAA/AUTHORITY acceptance should have the same revision number and date as the draft page
originally submitted.

   b. Changes or corrections made to ICA after FAA/AUTHORITY acceptance of ICA are
considered to be a revision.

23. INDICATING CHANGES TO INSTRUCTIONS FOR CONTINUED AIRWORTHINESS

The applicant could use any means to indicate changes to their ICA. The following is an
example used in the ICA Template.
   a. Any change to the ICA should be indicated as follows:
      (1) Changes made to a line should be indicated by a vertical bar in the left margin next to
          the line.
      (2) Changes made to a paragraph should be indicated by a vertical bar in the left margin
next to the paragraph letter or number.

      (3) Changes made to a complete page should be indicated by a vertical bar to the right of
the page number.

   b. Only revisions should contain change bars. Change bars are used to indicate changes for
that revision. Previous change bars should be removed at the next revision.





REVISION:                                         (PAGE NUMBER)
Revision 4                                                           01-00-00 Page 8


Page Apdx A - 20

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →