FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1050

PDF page 1050 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1050
AC 27-1B · 1050Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                                  AC 27-1B, Chg 7


that would result from the use of conventional controls, unless the decrement is inconsequential and the
design enables other significant performance gains or design simplifications.

                (C) Evaluate control markings to ensure application of a logical and consistent labeling
convention throughout the cockpit. The evaluation should also consider electronic control labeling,
particularly as applied across all display pages.  It is important that the expected pilot population
immediately and clearly understands the terminology chosen for that control function. The evaluation
should verify that the terms chosen conform to standardized aviation conventions. One list of standard
terms and acronyms accepted by certification authorities can be found in Appendix O of RTCA Document
DO-229C, “Minimum Operational Performance Standard for Global Positioning System/Wide Area
Augmentation System Airborne Equipment,” dated November 28, 2001.

                (D) It is also important to have consistent function labels. A function should have the
same name regardless of the display page on which it appears. Perform evaluations to determine
consistent placement of labels on the same key of the display when pages are changed. The evaluator
should ensure that all identical functions that are available across multiple screens or pages are
consistently mapped to the same control to the maximum extent possible. Failure to consistently position
soft-key functions can increase the time required to search and find a given function, and increase the
likelihood of entry error. One must also assess whether frequently used functions are readily accessible.
In most cases, frequently used functions will require a dedicated control to provide adequate accessibility.

                (E) Conduct all of the assessments as early in the program as possible. In addition,
these assessments should include a sample of test pilots that are not familiar with the system. This can
aid in the determination of the intuitiveness of labels and potential for misinterpretation.

    h. Sample HF Compliance Matrix. Figure AC 27-1 MG-20–3 shows a sample matrix and is not all-
inclusive. An actual matrix will likely be more complex and longer depending on the type of project.





                                                                   Page MG 20 - 21

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →