Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 7 2/4/2016
from subject pilots may be used. For example, the FAA and U.S Air Force developed a report for
certification use to assist in evaluation of pilot workload. This report, “Assessment of Crew Workload
Measurement Methods, Techniques, and Procedures,” Volume II (Report No. WRDC-TR-89-7006),
provides guidance for selecting and using a number of subjective, physiological, and performance based
workload measurement techniques.
(E) Depending on the level of integration required, use of a buildup approach may be
helpful. Use of integrated bench tests, ground mock-ups, and if possible ground tests with an installed
system helps identify issues early. Use of video and audio recordings can assist in analyzing pilot
interactions with systems in all phases of testing including flight tests. Test flights should assess
workload in all expected environments and for all operations requested in accordance with § 27.1525,
part 91, and part 135.
(F) An evaluation team is usually assembled when certificated systems and the proposed
system are significantly different. Such a team includes applicant test pilots, certification authority test
pilots, and, if the certification team deems it advisable, “line pilots” who routinely fly similar rotorcraft. The
testing should be conducted using scenarios representative of the type of operations used for the
rotorcraft. Testing should include various types of routes, navigational aids, environmental conditions and
traffic densities. Give particular attention to tasks that involve planning and execution of emergency and
non-normal procedures. When appropriate, also consider dispatch under the Master Minimum
Equipment List in combination with other failures that are likely to result in significantly increased pilot and
crew workload. Since display format and media also influence workload, the number, size, location, type
of display, and presentation format should also be part of the overall evaluation.
(G) Discussion of minimum crew and the associated crew workload between the involved
certification authorities and the applicant should take place early in the development cycle. These
discussions should focus on identification of design features that are likely to affect crew workload.
These design features need to be evaluated to ensure that they do not place excessive workload
demands on any crewmember. Applicants should submit a test plan describing the details of the
evaluation approach. Although developed for transport category airplanes, AC 25.1523 also contains
useful information to address this rule.
(xv) Section 27.1555(a). The intent of this regulatory provision is to ensure that pilots can
quickly and unambiguously identify the function and understand the method of operation for each cockpit
control. In conventional designs, the marking or labeling of controls may be accomplished using text that
describes the function of that control. With the advent of MFDs and integrated systems, there is an
emerging trend to integrate control functions into these displays. Many traditional systems (e.g., fuel,
power, electrical, warning, and caution) are being integrated into a single display along with their
associated control function and corresponding labels. The operation of these systems is accomplished
via interaction with MFD controls (bezel switches, touch screens, etc.) and software control labels or icons
that appear on the display screen. Carefully evaluate the design of these labels and their associated
meanings to determine that they adequately convey and completely define the control function and
system operation. Often, a single text message or acronym may not be sufficient to completely describe
the function and operation of that control.
(A) There has also been a growing trend to use icons rather than text on some of these
displays. The symbol used can often be difficult to interpret or require training for the pilot to remember
what it means. The overuse of symbols may require the pilot to revert to a manual for interpretation.
Therefore, ensure that pilots will be able to identify control functions with an acceptable level of accuracy
and consistency and in a timely manner. If icons are used, there should be no reduction in the level of
pilot performance when compared with performance obtained using text labeling, and can be measured
using time to interpret and accuracy of interpretation of that control function.
(B) There has also been a trend toward using multifunction controls (soft-keys) more in
rotorcraft. Pilots must be able to quickly and reliably identify the function controlled by these software
labels. Pilots should be capable of performing control-related tasks to the same performance standards
Page MG 20 -20