FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1051

PDF page 1051 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1051
AC 27-1B · 1051Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                                       2/4/2016





                                                                       Compliance                                                               17   ""     /                 /   V       /    Regulatory Requirement  7    7                                                                       Documentation
 § 27.771. Pilot compartment. For                                             √                    √    Report No.
 each pilot compartment - (a) The                                                                            60-002 compartment and its equipment
 must allow each pilot to perform his
 duties without unreasonable
 concentration or fatigue;
 § 27.777. Cockpit controls:                                             √             √            Report No.
 Cockpit controls must be - (b)                                                                            60-004 Located and arranged with respect
 to the pilots’ seats so that there is
  full and unrestricted movement of
 each control without interference
 from the cockpit structure or the
  pilot’s clothing when pilots from 5’2”
 to 6’0” in height are seated.
 § 27.1321. Arrangement and                                             √             √      √    Report No.
  visibility. (d) If a visual indicator is                                                                            60-004 provided to indicate malfunction of
 an instrument, it must be effective
 under all probable cockpit lighting
 conditions.
 § 27.1381. Instrument lights. The                                                            √      √    Report No.
 instrument lights must - (a) Make                                                                            60-012 each instrument, switch, and other
 devices for which they are provided
 easily readable; and….
 § 27.1381. Instrument lights. The                                                            √      √    Report No.
 instrument lights must - (b) Be                                                                            60-010 installed so that - (1) Their direct
 rays are shielded from the pilot's
 eyes and (2) No objectionable
 reflections are visible to the pilot.
 § 27.1555. Control markings. (a)                                             √      √             √    Report No
 Each cockpit control, other than                                                                            60-010 primary flight controls or control
 whose function is obvious, must be
 plainly marked as to its function
 and method of operation.


                     Figure AC 27 MG 20-3. Sample HF Compliance Matrix





Page MG 20 -22

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →