Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
across the cockpit. A well-defined and consistent color philosophy can greatly reduce the likelihood of
confusion and interpretation errors.
(C) Evaluations should be conducted in the rotorcraft using actual hardware. Testing
should include a variety of lighting conditions. It is important that the selected colors maintain integrity
(for example, red looks red, amber looks amber) and discriminability (that is, colors can be distinguished
reliably from each other) from all potential viewing angles and under all expected lighting levels.
(D) CAS panels should be easily seen and labels and messages easily legible in all
lighting conditions. The lighting of the panel should balance with the rest of the cockpit. Modification of
CAS panels, such as filtering for NVIS lighting, should be evaluated in all lighting conditions and pilot
viewing angles to ensure the CAS legends are easily seen and legible.
(E) Audio Alerts, Cautions, and Warnings:
(1) It is important to use audio alerts judiciously. Keep the number of audio alarms to
the minimum necessary to provide the desired result. Too many alerts can become confusing, annoying,
increase pilot workload, and detract from a pilot’s primary flight responsibilities.
(2) Spoken (voice) alerts can have advantages over other forms of audio warnings
since they convey specific information without the pilot having to interpret a tone or revert to a visual
display to determine the exact failure.
(3) Regardless of the method chosen to present audio alerts, evaluate them to
determine that they are readily detectable, easily heard under all ambient noise conditions, and quickly
and correctly interpreted.
(i) Ensure that the alerting tone or voice message is of sufficient intensity
(loudness) that it clearly stands out against all normal background noise.
(ii) Audio levels should be easily set and controlled in the event one alert is overly
loud and distracting. For example, if an audio alert is diverted from a cockpit speaker to headsets,
adjustment of the alert’s volume may be necessary to compensate for the lower ambient noise of a
headset than the ambient noise in a cockpit.
(x) Section 27.1357(d). Applicants may choose to use methods similar to those employed for
§ 27.777 to demonstrate the ability of the pilot to identify and reach a specific circuit breaker or fuse when
essential to safety in flight. Applicants should describe how to evaluate the ability of the pilot to identify
the device readily and whether it is installed on a circuit breaker panel or controlled using an electronic
device (such as a screen that can display the circuit breaker status and is controllable). The use of a
circuit breaker or fuse as a switch to power-on or power-off equipment is not an acceptable design
practice since the circuit breaker or fuse are not intended to function as a switch.
(xi) Section 27.1367. This regulation has some similarities to § 27.777(a) and (b), except it
applies to electrical switches instead of cockpit controls. The discussion and methods of compliance
discussed under that section are applicable to this one. Criticality of use should determine the location of
cockpit switches (e.g., importance, frequency of use). Evaluations should be conducted with a number of
pilots representing a male and female fifth percentile and 95th percentile in body size and reach. The
range in size and reach are important to ensure that the location allows both extremes of pilot to see and
read the label, reach the switch, and manipulate it.
(xii) Section 27.1381.
(A) This regulation directly correlates with § 27.773. The primary purpose of cockpit
lighting is to allow the crew to quickly see, accurately locate, identify, and, if appropriate, interact with
displays or controls under both low and high ambient lighting conditions. It is especially important to be
Page MG 20 - 17
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.