Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
the pilot is strapped into the seat wearing the lap belt and shoulder harness. See also the guidance in
section 27.777, paragraph b, of this AC. It is important to conduct evaluations using individuals
representing a range of potential user physical dimensions and users wearing different apparel, such as
long sleeved shirts, jackets, and gloves. Applicants may use analytical methods, such as computer
modeling of the cockpit or flight deck and the pilots, for early problem identification and risk reduction.
Regardless of the analytical models used, demonstrate compliance in either a high fidelity mockup that
accurately represents the actual rotorcraft or in an actual rotorcraft. Although the regulation requires
compliance for a certain range of pilot heights, consider also using individuals from a fifth percentile
female and a 95th percentile male body stature. Consider using individuals that have a range of arm reach
and seating statures within the selected population.
(vi) Section 27.785. This regulation is related to § 27.777(b). Section 27.785(c) requires that
the restraint system allows crewmembers to perform "functions necessary for flight operations” while
restrained by the safety belt and shoulder harness. The discussion and suggested evaluation procedures
for § 27.777(b) in paragraph g.(2)(v)(B) above are applicable and should be used for finding compliance
with this regulation as well, with the exception that evaluations must be conducted with crewmembers
seated with safety belts and shoulder harnesses fastened. Additionally, evaluators should only assess
the capability to perform functions necessary for flight operations. The certification plan should include a
list of those cockpit functions necessary for flight operations under normal and abnormal conditions. As in
§ 27.777(b), consider using individuals from a fifth percentile female and a 95th percentile male body size
to assess compliance.
(vii) Section 27.1301. This regulation has broad implications and addresses a wide range of
design and operational considerations. An important aspect of this regulation that can significantly affect
the evaluation and finding of compliance is the interpretation of the "intended function" of a system. The
system’s intended function is typically determined by assessing the design, functional capability, and
operational use of the system. Applicants will generally provide this information for certification purposes.
Applicants should work cooperatively with the certification authority so that the “intended function” of a
system is accurate, reliable, realistic, and acceptable. Therefore, it is important that the certification team
assess the design, functional capability, and use of the system and compare that with the description of
the intended function.
(A) Section 27.1301(a). The use of performance-based criteria should be used in
determining that a system is of a kind and design appropriate to its intended function. Applicants should
consider the complexity of the system in determining the test requirements. For concerns pertaining to
the pilot-vehicle interface, the evaluation should investigate the capability of the pilot to perform related
tasks adequately. Performance measurements such as time-to-perform, number of inputs, accuracy,
comprehension, awareness of system state and performance, and perceived workload may be collected
to assess compliance. Evaluations should be conducted using operationally representative scenarios.
Simulation may be used to verify that properly trained pilots can adequately perform all tasks using the
system. Finally, flight tests can be used to investigate specific normal and abnormal operational
scenarios.
(B) Section 27.1301(b). This part of the regulation pertains to proper labeling of cockpit
equipment for identification, functionality, and operating limitations, usually accomplished by placing a tag
or label on the outside of the equipment. The labeling of any associated controls must comply with
§ 27.1555.
(viii) Section 27.1321.
(A) Section 27.1321(a). This regulatory provision does not specify the precise location in
the instrument panel of flight, navigation, and powerplant instruments in normal category rotorcraft
certificated under VFR. However, this rule correlates with the requirements of § 27.771(a). Placement of
instruments and gauges used by the pilot to fly the rotorcraft directly affects the pilots’ concentration and,
in some cases, fatigue. When designing an instrument panel for normal category rotorcraft operating
under VFR conditions, consider the environment in which the rotorcraft will operate. For example, at
Page MG 20 - 13