FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1041

PDF page 1041 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1041
AC 27-1B · 1041Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                                       2/4/2016


                (E) Cockpit environmental control. Consider sufficient heating and cooling ability along
with adequate ability to defrost or defog windscreens.

                (iv) Section 27.773(a)(1). There must be sufficient external vision to enable the pilot to safely
fly and control the rotorcraft. The design must provide a level of safety that ensures adequate external
vision to see and avoid traffic and other obstacles in the environment. Consider any optical distortions in
the windshield or canopy, especially in the prime viewing areas, which may degrade external viewing.
For additional information, see section 27.773 of this AC.

                (A) The capability to provide an adequate view of the external environment is essential
for safe operation. Applicants should consider defining an eye reference point in the design that will
account for the range of expected pilot physical dimensions. Conduct evaluations with individuals that
represent a range of different human physical dimensions. Consider seat adjustment capability as it
accommodates the range of expected pilot physical dimensions. Give particular attention to the size and
location of rotorcraft structures that may obstruct the external view. Section 27.773 of this AC contains a
cockpit visibility diagram showing the horizontal and vertical obstruction limits applicable to pilot visibility.

                (B) Reflections. There should be no compromise of vision outside the cockpit by
reflections from either internal or external lighting sources. Assess reflections from instrument and panel
lighting as to their effect on pilot external view. Refer to section 27.773 of this AC for the area of the pilot
compartment field of view that should be free from obstruction. Reflections appearing in this area should
be blocked or otherwise diminished. Ensure that reflections do not affect outside visibility looking cross-
cockpit.  If possible, use full scale mockups to assess night lighting reflections to reduce program risk by
identifying potential problem areas early. Assess the effect of cabin lighting on reflections in the pilot’s
view area. Consider the use of curtains or other modifications to eliminate reflections from the aft cabin.

                (C) Sunlight reflecting off instruments, display faces, and other cockpit structures will
affect the pilot’s performance. Blocking or shading features may need to be included in the design.
Additionally, check to ensure instruments, indicators, and displays are readable in all lighting conditions.

                (D) Glare from instrument lighting can cause pilot performance issues. Light balance and
instrument lighting design should allow the pilot to illuminate all instruments and panels without having to
adjust for glare. External lights can also create glare if the rotorcraft windows and windscreen scatter
light entering the cockpit. Assess for glare in both night and day environments. Assess the cockpit in all
potential lighting conditions with sun at all angles, including dawn or dusk conditions, with the sun near
the horizon, higher sun angles (both in front, behind, and directly overhead of the rotorcraft), and during
night conditions (both dark night and moonlit conditions). In addition, evaluate the effect various internal
lighting selections and levels have on readability and usability of rotorcraft equipment and systems and
the ability to see outside the cockpit.

              (v) Section 27.777.

                (A) Section 27.777(a). This regulatory provision addresses the usability of a control from
a location and identification perspective. The location of a control can significantly affect the pilot’s ability
to identify the control easily, the ease and convenience of operation of the control, confusion as to the
control's operation, and an inadvertent operation of that control. Several techniques can aid in control
identification and use. The size, shape, color, configuration, and method of operation can discriminate
between controls and aid in control identification. Consider these other design related characteristics,
relative to the control's location, when evaluating control identification and use. Unless its function and
method of operation are obvious, a control must be labeled in accordance with § 27.1555. The
suggested analyses and evaluation procedures described for showing compliance with § 27.671 are also
applicable and recommended for this regulation.

                (B) Section 27.777(b). This regulatory provision addresses the capability to operate a
control through its full range of motion, considering potential interference from clothing and cockpit
structures. This assessment can be accomplished simultaneously with the assessment for § 27.785(c) if


Page MG 20 -12

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →