FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1043

PDF page 1043 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1043
AC 27-1B · 1043Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                                       2/4/2016


night, by definition, visibility is restricted due to darkness. Though meeting the meteorological definition of
VMC, the pilot may or may not have a distinct horizon and could be more susceptible to spatial
disorientation due to lack of visual cues. When adding instruments not required by regulations but which
the pilot will use to operate the aircraft, ensure the instruments are in or as close as possible to the pilots’
primary field of view. This will make the pilot’s scan easier and less time consuming: if pilots have to
spend greater time searching for information during their scan, they spend less time looking outside for
visual cues.

                      (1) Appendix B of this AC provides design guidance for the placement instruments
and information for normal category rotorcraft certificated for IFR flight. To minimize head movement, it is
important to place instruments as close to the pilot’s central line of vision as possible. This lowers the risk
of pilot spatial disorientation due to vestibular stimulation or slow instrument scan due to not clustering
them close to each other. The proposed types of operations and the proposed cockpit layout can provide
initial information relating to pilot ability to see the instruments and gauges easily. Analysis of the angular
offset of a display from the pilot’s centerline of vision may be necessary to determine how accessible that
display is in a visual scan. Currently, integrated display technology allows display of primary flight
information in front of the pilot without the loss of critical flight display parameters. Additionally, the visual
angle subtended by the display may be used to determine how readable the display will be (apparent
display size). Final assessment of the acceptability of the visibility of the instruments will require a
geometrically correct mockup or the actual rotorcraft.

                      (2) Figures AC 27 MG 20-1 and AC 27 MG 20-2 show the horizontal and vertical,
primary and secondary fields of view for use in rotorcraft installations.

                                     (i) Primary field of view. The primary field of view is for high priority information
the pilot needs to see to operate the rotorcraft. The pilot must be able to scan and access information in
the primary field of view with little to no head movement. Examples of information normally placed in the
primary field of view are:

                        •
                        •   Master warning or caution (or high priority warnings and caution messages if
                           not providing a master warning or caution annunciator).
                        •   Autopilot and flight guidance system modes.
                        •   Navigation information relating to course and vertical guidance and deviation.
                        •   Primary powerplant information (NR/N2, TQ, N1, TOT).

                                       (ii) Secondary Field of View. The secondary field of view is for information the
pilot needs but that is not as high a priority as primary flight information. The pilot should be able to see
information in the secondary field of view with little head movement. However, the further away from the
primary field of view, the more the pilot needs to turn his head to see the instrument. Take the importance
of the information the pilot is looking for into account when placing instruments and gauges within the
secondary field of view. Examples of information placed in the secondary field of view are:

                        •  Crew Advisory Warning System (CAWS) panel (if a master warning caution
                           annunciator is installed and in the pilot’s primary field of view).
                        •   Secondary power plant information.
                        •   Autopilot or Flight Director control functions.
                        •   Standby instruments.
                        •   Navigation control and selection.





Page MG 20 -14

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →