FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1038

PDF page 1038 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1038
AC 27-1B · 1038Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                                  AC 27-1B, Chg 7


              (v) If a failure occurs, it will not prevent the pilot from safely operating the rotorcraft.

         (2) The manufacturers should provide design rationale for their decisions regarding new or unique
features in a display. Evaluation pilots should verify that the data support a conclusion that any new or
unique features have no unsafe or misleading design characteristics.

         (3) Several pilots as well as human factors representatives should conduct display and system
interface evaluations particularly when the applicant is installing a system for the first time in a particular
category of helicopter. More than one test pilot should be used to ensure multiple data inputs. For
systems that contain new or unique features, consider a greater number of evaluators. A reasonable
amount of training time should be allowed to learn all required features of the display system. The
evaluators should be familiar with the guidance contained in this advisory circular before performing the
evaluation. Additional information helpful in developing evaluation plans. For instance, example
information regarding evaluation plan development can be found in GAMA Publication No. 10,
Recommended Practices and Guidelines for Part 23 Cockpit/Flight Deck Design; DOT/FAA/AM-01/17,
Human Factors Design Guidelines for Multifunction Displays; and section AC 27 MG 19 of this AC.

      f. Methods of Compliance. The parts of the certification plan that address the HF portions of the
regulations should describe the methods used to demonstrate compliance with sufficient detail to allow
the certification authority to evaluate the appropriateness and adequacy of the proposed methods of
compliance.  It is important that the proposed methods of HF compliance are coordinated and discussed
with the certification authority to identify HF issues early in the program to avoid certification schedule
delays. Paragraph h. of this MG below, contains a sample compliance matrix for HF.

    g. Discussion of selected part 27 regulations related to human factors and performance.

         (1) For the purposes of brevity, the regulations discussed are not restated. For all compliance-
related documents, the certification plan should use the exact wording of the regulation.

                  (i) This part of the guidance does not include all regulations associated with HF and flightcrew
interfaces listed in the table in paragraph b. above. In addition, several of the regulations are written in
general terms. In these cases, subjective data are often used to establish compliance

                    (ii) Due to the subjective nature of many of the HF aspects of the regulations, the certification
authorities encourage applicants to carefully consider and thoroughly describe the means they intend to
use to demonstrate compliance with each regulation. The applicant may choose to provide the detailed
description of the means of compliance in subsequent submitted test plans. Use the information
contained in the discussion for each regulation, presented paragraph g.(2), to assess the appropriateness
and adequacy of the chosen methods. The certification authority and the applicant should meet to
discuss and reach agreement as to the acceptability of the proposed techniques prior to the collection of
compliance demonstration data. Demonstrate compliance through similarity and minimal testing for
simple and straightforward applications that have little impact on pilot workload, system awareness,
tasking, or performance.  It should be understood that the regulations discussed in paragraph g.(2) are
not a comprehensive list.

                     (iii) More complex, integrated designs may require pilot evaluation under actual anticipated
flight conditions after the performance of analytical and component-level bench evaluations. For these
tests, it is critical the flight test pilots are objective regarding their performance using systems and
controls.  If using pilots other than test pilots, observers should be alert to possible differences between
how the pilot performs and interfaces with a system and the pilot’s ratings. The test program should
include sufficient simulation and flight testing to ensure:

                (A) Reasonable training times and learning curves.

                (B) Acceptable interpretation and operation error rates equivalent to or less than
previously certificated comparable systems.


                                                                    Page MG 20 - 9

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →