Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
Acronym Description
EADI Electronic Attitude Direction Indicator
EHSI Electronic Horizontal Situation Indicator
EICAS Engine Indication and Crew Alert System
ELOS Equivalent Level of Safety
EVS Enhanced Vision Systems
FAA Federal Aviation Administration
FD Flight Director
FHA Functional Hazard Assessment
FLS Field-Loadable Software
FMEA Failure Modes and Effects Analysis
FOV Field-Of-View
GPS Global Positioning System
HIRF High Intensity Radiated Fields
HUD Head-Up Display
HSI Horizontal Situation Indicators
ICAO International Civil Aviation Organization
IFR Instrument Flight Rules
ILS Instrument Landing System
IMC Instrument Meteorological Conditions
JAR Joint Aviation Requirements
LCD Liquid Crystal Displays
LED Light Emitting Diodes
LNAV Lateral Navigation (Used with GPS)
LPV Localizer Performance with Vertical Guidance (Used with
GPS)
METAR Meteorological Aviation Report
MFD Multifunction Flight Display
MG Miscellaneous Guidance
ND Navigation Display
PFD Primary Flight Display
PFI Primary Flight Information
POH Pilot's Operating Handbook
RAIM Receiver Autonomous Integrity Monitoring (used with GPS)
SAE Society of Automotive Engineers
STC Supplemental Type Certificate
SVS Synthetic Vision Systems
Page MG 19 - 7
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.