Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 7 2/4/2016
(v) Miscellaneous Documents.
Note: The part 23 and part 25 ACs and the GAMA publications listed below are not intended to serve as
means of compliance for part 27 requirements. However, these documents may contain useful
reference information that may be acceptable to the certificating authority on rotorcraft
certification projects. When referencing these documents, ensure part 27 requirements are
adequately addressed, particularly for part 27 IFR certifications. Coordinate early with the
certificating authority if part 23, 25, or GAMA guidance is proposed to be used.
Document Title
PS-ACE100-2001-004 Guidance for Reviewing Certification Plans to Address
Human Factors for Certification of Part 23 Small
Airplanes
AC 23-23 Standardization Guide For Integrated Cockpits In Part
23 Airplanes
AC 23.1311-1C Installation of Electronic Display in Part 23 Airplanes
AC 25-11B Electronic Flight Deck Displays
AC 25.1322-1 Flightcrew Alerting
GAMA Pub 10 (Version 1.0) Recommended Practices and Guidelines for Part 23
Cockpit/Flight Deck Design
GAMA Pub 12 (Version 2.0) Recommended Practices and Guidelines for an
Integrated Cockpit/Flightdeck in a Part 23 Airplane
(2) Acronyms and Descriptions.
(i) Acronyms:
Acronym Description
AC Advisory Circular
ACO Aircraft Certification Office
ADC Air Data Computer
ADI Attitude Director Indicator
ADDS Aviation Digital Data Service
AFM Aircraft Flight Manual
AFMS Aircraft Flight Manual Supplement
AHRS Attitude Heading Reference System
ARD Aerospace Research Document
ARP Aerospace Recommended Practice
AS Aerospace Standard
ASTC Amended Supplemental Type Certificate
CA Certification Authority(ies)
CAR Civil Air Regulations
CFR Code of Federal Regulations
CIP Current Icing Potential
CS Certification Standard (EASA)
Page MG 19 -6
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.