Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 5 6/13/2014
(ii) 8110.4, Type Certification.
(4) Applicable guidance:
(i) Policy Statement PS-ASW-27,29-09, Rotorcraft Advanced Flight Controls
(AdFC) Handbook.
(ii) SAE, International ARP 4754A, Guidelines for Development of Civil Aircraft
and Systems.
(iii) SAE, International ARP 4761, Guidelines and Methods for Conducting the
Safety Assessment Process on Civil Airborne Systems and Equipment.
c. Background. The FAA recognizes that technology utilized in commercial
rotorcraft consistently lags behind state-of-the-art air transport aircraft and military
technologies. AdFC technology has been in use for many years, but guidance material
on the safety aspects of certification, continued operational safety, and especially the
use of that technology has been limited within the FAA.
d. Application. Applicants seeking approval for the installation of an AdFC system in
rotorcraft should apply this guidance as a means, but not the only means, for showing
compliance with the applicable rules.
(1) Since part 27 regulations are inadequate for addressing the new and novel
features of AdFC systems, special conditions, equivalent means of compliance, and
methods of compliance issue papers may be required to establish safety standards in
the following areas:
(i) Interaction of Systems and Structures. Since rotorcraft with AdFC systems
may contain control functions that affect the structural integrity of the rotorcraft,
additional safety considerations are necessary to address the effects of these systems
on structural integrity, either directly or because of AdFC failures.
(ii) Pilot and Co-Pilot Dual Controls. Since the current regulations address
mechanically linked controls only, additional safety considerations are necessary to
address potentially confusing aspects of pilot and co-pilot dual, non-linked controls. As
an example, a non-responsive control input could prevent compliance with § 27.779.
(iii) Lateral-Directional and Longitudinal Stability and Low Energy Awareness.
An AdFC allows for many possibilities in developing laws for novel flight control. In the
simplest form, an AdFC could replace the function of a direct link between the flight
controls and the swashplate. The current requirements were written with the
conventional systems of the rotorcraft handling qualities in mind. A more likely situation
is the use of an AdFC to modify the relationship between control input and rotorcraft
response.
Page MG 17 - 2
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.