Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 7 2/4/2016
(i) Installation and certification of the NVIS-compatible lighting on the aircraft. This process
ensures the NVIS lighting installation is compatible with day and night-unaided (without NVG) use.
(ii) Certification that the installed NVIS lighting is compatible with NVG operations. The
structure of this guidance is to assist in both the design and installation of the NVIS lighting system and in
the certification that the lighting system is NVG compatible. Compatibility of the NVIS installation and
NVGs must be assessed using each make and model part number of the NVG that the applicant
proposes for NVIS operations. Any subsequent change in the goggle specification or cockpit lighting
configuration may render the current approval invalid and will require a re-evaluation for NVIS cockpit and
NVG compatibility.
Notes: Aircraft intended for NVG operations must go through the NVIS certification process, whether
modified by supplemental type certificate (STC) or produced by the aircraft manufacturer.
Basic aircraft approval for day and night VFR does not constitute NVIS certification. In
addition, some rotorcraft may not be suitable for NVIS certification due to factors such as
cockpit obstructions, inability of pilots to move their heads while wearing NVGs, inability of
the cockpit to accommodate a pilot wearing a helmet, etc.
Certification ground and flight test scheduling should account for nighttime ambient lighting
conditions. Type inspection authorization (TIA) flights should be accomplished in no-moon
conditions to avoid masking possible low illumination, incompatible lighting effects during the
NVIS cockpit, and NVG interface evaluations. In addition, fly the flight test in areas where
there is little or no cultural lighting.
Installation of a NVIS lighting system does not authorize the operation of NVGs. The
operator must coordinate with the FAA oversight office to obtain operational authorization.
Page MG 16-4
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.