Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/12/03 AC 27-1B, Chg 1
CHAPTER 3
AIRWORTHINESS STANDARDS
NORMAL CATEGORY ROTORCRAFT
MISCELLANEOUS GUIDANCE (MG)
AC 27 MG 15. AIRWORTHINESS APPROVAL OF ROTORCRAFT HEALTH USAGE
MONITORING SYSTEMS (HUMS)
a. Purpose. The purpose of this section of the AC (AC 27 MG 15) is to provide
guidance to achieve airworthiness approval for rotorcraft Health and Usage Monitoring
System (HUMS) installation, credit validation, and Instructions for Continued
Airworthiness (ICA) for the full range of HUMS applications. Mandatory terms used in
this section of the AC, such as “must", are terms used only in the sense of ensuring the
applicability of these particular methods of compliance when the acceptable means of
compliance described herein are used. This section of the AC does not change
regulatory requirements and does not authorize changes in, or deviations from,
regulatory requirements. This section of the AC establishes an acceptable means, but
not the only means of certifying a rotorcraft HUMS. AC 27 MG 15 addresses the most
complex/extensive HUMS; systems of lesser complexity may be addressed by use of
only the parts of this section of the AC that are pertinent. HUMS applications in the
Catastrophic criticality category are not addressed herein.
b. References and Related Documents.
(1) Federal Aviation Regulations (FAR) Parts 21, 27, 33, 91, 125, 127, 129,
133, 135, 145 – Corresponding European Joint Aviation Requirements (JAR) 21, 27,
JAR E, JAR-OPS 3.
(2) FAA Advisory Circular AC 27-1B and the European corresponding ACJs,
AMJs where applicable.
(3) Standards - Latest revision of RTCA/DO-160/ED-14, RTCA/DO-178/ED-12,
SAE documents ARP 4754, and ARP 4761.
c. Background.
(1) Various types of HUMS have been developed, and they are likely to be
used more in the future. Initially, these systems were installed to show the feasibility of
gathering meaningful data to modify required maintenance and/or operational actions.
The degree of qualification required for this type of installation is relatively low.
However, there is an increasing number of certification applications to install HUMS and
use its data to intervene in maintenance and/or operations of the rotorcraft. This type of
Page MG 15 - 1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.