Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
4/25/06 AC 27-1B, Chg 2
any other critical operating limit, such as VD, for a VSTOL aircraft) with the extent of
damage for which residual strength and stiffness are demonstrated.
(iii) Where appropriate, crash impact dynamics considerations should be
taken into account to ensure proper crash resistance and a proper level of occupant
safety for an otherwise survivable impact. Please reference §§ 27.562 and 27.952.
(8) The eighth area is the special repair and continued airworthiness
requirements of §§ 27.611, 27.1529, and 14 CFR Part 27 Appendix A for composite
structures. When repair and continued airworthiness procedures are provided in
service documents (including approved sections of the maintenance manual or
instructions for continued airworthiness) the resulting repairs and maintenance
provisions must be shown to provide structure that continually meets the guidance of
paragraphs (1) through (7) of this AC paragraph. All certification based repair and
continued airworthiness standards, limits, and inspections must be clearly stated and
their provisions and limitations defined and documented to ensure continued
airworthiness. No composite structural repair should be attempted that is beyond the
scope of the applicable approved Structural Repair Manual (SRM) without an
engineering design approval by a qualified FAA/AUTHORITY representative (DER or
staff engineer).
Page MG 8 - 31
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.