FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 84

PDF page 84 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 84
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     3/31/2014


AC 27.65. § 27.65 (Amendment 27-14) CLIMB: ALL ENGINES OPERATING.

   a. Explanation.

      (1)   Rotorcraft other than helicopters.

            (i) Section 27.65 requires that the steady rate of climb be determined for each
rotorcraft other than helicopter with maximum continuous power on each engine for the
range of weights, altitudes, and temperatures for which certification is requested.
Equivalent levels of safety have been found wherein the applicant was allowed to select
a climb airspeed that was not the actual VY. The selected airspeed must be consistent
with the speed used to show compliance with such items as cooling, stability, etc. The
rate of climb resulting from the selected climb airspeed versus that from the actual VY
shall not differ to an extent that a pilot will be encouraged, by appreciable increases in
climb performance, to fly a climb airspeed different from that published in the flight
manual.

         (ii)For rotorcraft other than helicopters, the climb performance data obtained
above must be used to show that a minimum climb gradient can be achieved for each
weight, altitude, and temperature within the range for which certification is required.
This gradient must be at least 1:10 if testing is done to determine the required takeoff
distance over a 50-foot obstacle.  If this option is selected, an explanation of the takeoff
distance determination requirements and procedures may be found in
paragraph AC 29.63 of AC 29-2C.

              (iii)    If takeoff distance is not determined, the minimum climb gradient must be
1:6 for standard sea level conditions.

      (2)  For helicopters, VY must be determined for standard sea level conditions at
maximum weight using maximum continuous power on each engine. Although not
required, the steady rate of climb may be determined using the procedure in
paragraph AC 27.65c of this section (Procedure to Determine All-Engine-Operating
Climb Performance).

                      [Section AC 27.65 continued on next page.]





Page B – 26.2

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →