FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 805

PDF page 805 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 805
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B

                        CHAPTER 3
                  AIRWORTHINESS STANDARDS
               NORMAL CATEGORY ROTORCRAFT

                 MISCELLANEOUS GUIDANCE (MG)

AC 27 MG 3. DEFINITION OF ENGINE ISOLATION FEATURES AS APPLIED TO
           §§ 27.79(b)(2), 27.141(b)(1), and 27.143(d)(1) (Amendment 27-19).

     a. Explanation.

         (1) Each of the cited performance and flight characteristic sections of Part 27
mention multiengine rotorcraft meeting transport Category A engine isolation
requirements or refer to engine isolation features which ensure continued operation of
the remaining engine. Unlike normal category fixed-wing (Part 23, § 23.903(c)) and the
transport category fixed-wind and rotorcraft regulations, Part 27 does not provide a
general engine isolation rule to make this determination.

         (2) While it is clear that Part 27 does not require complete engine isolation, if
credit for this feature is claimed (i.e., sudden complete engine power failure is not
considered in showing compliance with the cited section), criteria must be established to
allow a satisfactory isolation assessment.

         (3) An approach which the FAA/AUTHORITY would find acceptable in making
a Part 27 engine isolation determination is given. The FAA/AUTHORITY logic for
establishing this criteria is also presented.

     b.  Criteria.

         (1) The engine isolation provided may be for an appropriate limited time period.

         (2) The failure or malfunction of any engine or the failure of any system that can
affect any engine will not-­

                  (i)   Prevent the continued safe operation of the remaining engines for the
appropriate limited time period; or

                   (ii)   Require immediate action by a crewmember for continued safe
operation.

         (3) Each engine must be isolated by a firewall, shroud, or equivalent means
from the remaining engines.

      c.  Criteria Rationale.



                                                       Page MG 3 - 1

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →