Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
(iv) Flight Test.
(A) Conduct flight evaluations of the GPS, autopilot, and flight guidance
system function together, as required, to ensure integration. Additionally, if use for
steep angle point in space (PINS) or other specialized uses are envisioned, flight
evaluations are needed to ensure the integration of the activities coupled with the
handling characteristics of the aircraft provides the capability to perform the approaches
without undue concentration or excessive workload on the part of the pilot. See
AC 20-138 (current version), Chapter 20 for further guidance.
(B) Steep angle (> 4 degrees glide path angle) low speed (<70kts KIAS)
approaches should be evaluated for IFR certificated aircraft.
(1) Evaluate:
(i) Aircraft handling in different coupled modes at the rotorcraft Vmini
at critical CG.
(ii) Steepest glide path angles requested at each of the coupled
modes used (see section AC 27, Appendix B of this AC for glide path angle limitations
and Vmini).
(iii) For three axis autopilots, assess pilot workload and autopilot
capabilities in all coupled modes used for steep approaches.
(iv) For four axis autopilots, assess pilot workload, and autopilot
capabilities in all coupled modes.
(v) Assess pilot workload with pilot hand flying:
(A) Minimum equipment required for IFR flight.
(B) Flight director modes, if installed.
(vi) Assess pilot workload, pilot-system interface on missed
approaches terminating at the holding fix.
(vii) Abuse testing should include:
(A) Deviation from glidepath and lateral course on intermediate
and the final approach segments.
(a) Deviations should be at least one dot laterally and one
dot vertically.
Page MG 1 -15
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.