FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 792

PDF page 792 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 792
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                      AC 27-1B, Chg 7


              (B) Reradiation of VHF transmitter energy such that navigation
crosspointers are affected.

             (C) Reception of FM broadcast, at high level, in VHF communications.

             (D) Inadvertent activation of the ELT by VHF transmitted energy (see AD
72-22-3.)

                (ii) ELT installation. TSO-C126 specifies that the ELT be automatically
activated when subjected to a force of 5.0(±2, -0)g in the direction of the longitudinal
axis of the aircraft. We consider this mounting recommendation satisfactory for
rotorcraft. In recognition of the significant vertical impact velocity that rotorcraft
commonly have, an optional placement of the ELT pitched down 30° from the horizontal
axis of the rotorcraft is also satisfactory.

       (16) Audio Interphone Systems. Demonstrate acceptable communications for all
audio equipment including microphones, speakers, headsets, and interphone amplifiers.
Test all modes of operation, including operation during emergency conditions (i.e.,
emergency descent, and oxygen masks) with all rotorcraft engines running, all rotorcraft
pulse equipment transmitting, and all electrical equipment operating.

       (17) Portable Battery Powered Megaphones. Evaluate megaphone performance
in accordance with AC 121-6.

       (18) Global Positioning System (GPS)/Satellite-Based Augmentation System
(SBAS) Wide Area Augmentation System (WAAS). GPS installations in rotorcraft can,
depending on other installed equipment, result in significant changes in the aircraft’s
operational capabilities. Installation of stand-alone GPS navigators not integrated with
any other aircraft systems can be straightforward and simple. AC 20-138 (current
version), Chapter 14 contains information on GPS/SBAS installations. The following
elaborates on and takes precedence over the means of compliance referenced in
AC 20-138 (current version) for rotorcraft installations.  If considering point in space
approaches using WAAS (SBAS) capabilities, it may be helpful to review of RTCA
Document DO-229 (current version).

               (i) Installations that integrate with existing primary flight and navigation
instruments to provide flight guidance to the pilot may be more complex and require
more testing and evaluation to ensure the integration performs its intended function.
Integration of GPS with an AFCS is more complex and requires more testing and
evaluation. Installation of GPS-WAAS requires evaluation of integration between the
GPS, autopilot, and flight director (if installed).

                (ii) Consider installation of GPS-WAAS with the intent of allowing steep angle
or low speed approaches and accomplish through the STC process.



                                                       Page MG 1 -13

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →