FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-49

PDF page 779 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 779
AC 27-1B · G-49Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B

                   (ii)   Center of Gravity Limits. The approved center of gravity ranges
should be presented with due accounting for landing gear position.

                    (iii)  Dimensions and Datum Line Locations. The dimensions and relative
location of rotorcraft features associated with weighing and loading of the rotorcraft and
with weight and balance computations should be described and/or illustrated.

               (iv)  Equipment List. The rotorcraft should be defined or described
sufficiently to identify the presence or absence of optional systems, features, or
installations that are not readily apparent. In addition, all other items of fixed and
removable equipment included in the empty weight should be listed.

              (v)   Fuel and Other Liquids. Fuel and other liquids, including
passenger-service liquids that are included in the empty weight, should be identified and
listed together with information necessary to enable ready duplication of the particular
condition.

               (vi)  Weight Computations. Computations of the empty weight and
empty-weight CG location should be included.

                (vii)  Empty Weight and Empty-Weight Center of Gravity Location.
Statement of these values should be included.

                 (viii) Loading Schedule. Loading schedule should be included, if
appropriate.

               (ix)  Loading Instructions. Complete instructions relative to the loading
procedure, or to use the loading schedule, should be included.





                                                       Page G - 49

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →