FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-35

PDF page 762 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 762
AC 27-1B · G-35Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B

         (6) Supplements are incorporated in the manual by inserting the applicable
pages that contain the information associated with the particular change. Each
supplemental page should also identify the rotorcraft type and model flight manual for
which the supplement was issued, the name of the issuer, and the FAA/AUTHORITY
approval date. The following statement is an example of a note which would be
included on the title page of a flight manual supplement: “For rotorcraft approved to
operate in accordance with the provisions of this rotorcraft flight manual supplement, the
information contained herein supplements the information of the basic flight manual.
For limitations, procedures, and performance data not contained in this supplement,
consult the basic flight manual.”

         (7) Supplements should contain as much of the flight manual contents outlined
below as considered appropriate for the particular change in type design, including title
page and index of contents.  It is suggested that these be prepared with a view to
insertion in the FAA/AUTHORITY-approved portion of the flight manual as a complete
and self-contained unit.

         (8) The RFM should contain as much of the information required in Part 27 as
is applicable to the individual type and model. For the purpose of standardization, it is
recommended that the sequence of sections and of items within sections follow the
format presented at the end of this paragraph if practicable.

         (9) The following information would normally be included in the introduction
section of the flight manual.

                  (i)    Title Page. This page should include the manufacturer’s name and
address and the rotorcraft model number as it appears on the type certificate data
sheet.  If desired, include a trade name or trade model number in quotes, provisions for
rotorcraft serial number and registration number, approval date of the basic document,
and title and signature of the FAA/AUTHORITY approving official.

                   (ii)   Table of Contents. An index should be located at the front of each
section or at the front part of the manual.

                    (iii)  Amendment Log. This log should be in the form of a table with
provisions to record each amendment, an identifying number, title or description, the
page numbers involved, the issue date, the identification of the FAA/AUTHORITY
approving official, and the FAA/AUTHORITY approval date.

               (iv)  Separate amendment logs should be provided for each type of
amendment issued; i.e., Log of Revisions, Log of Supplements, etc. Amendments
issued by other than the holder of the basic type certificate should include a separate
amendment log, which in addition to the issue date, should also identify the issuer and
the STC number or other approval basis for the associated modification.




                                                       Page G - 35

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →