FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-20

PDF page 733 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 733
AC 27-1B · G-20Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                           2/12/03

requirements, standard industry practices, and guidance for Instructions for Continued
Airworthiness.

                    (iii)   Preparation. The applicant must prepare Instructions for Continued
Airworthiness that is applicable to the type of certification. The holder of a design
approval for a type certificate normally will comply with all requirements specified in
Appendix A to FAR/JAR Part 27. The holder of a design approval for a supplemental
type certificate would only comply with requirements specified in Appendix A to
FAR/JAR Part 27 that are applicable to their type design change.

               (iv)   Submittal. The applicant must submit to the FAA/AUTHORITY the
applicant’s Instructions for Continued Airworthiness, and any authorized publication
referenced in the applicant’s Instructions for Continued Airworthiness, i.e.,
FAA/AUTHORITY-accepted engine and appliance Instructions for Continued
Airworthiness.

              (v)   Evaluation.

              (A) The FAA/AUTHORITY will evaluate the applicant’s Instructions for
Continued Airworthiness to determine that they meet the requirements of FAR/JAR
§ 27.1529 and Appendix A to FAR/JAR Part 27.

              (B) For a type certificate, the determination is made in two parts. The first
is an FAA/AUTHORITY review, followed by FAA/AUTHORITY personnel conducting an
Aircraft Maintainability Evaluation or equivalent, when requested to determine the
acceptability of the Instructions for Continued Airworthiness. For a supplemental type
certificate the determination is made by an FAA/AUTHORITY review, unless the
supplemental type certificate affects multiple major appliances or systems; then the
process for type certificate would be used.

               (vi)  Acceptance as per Authority procedures. For FAA, acceptance of the
Instructions for Continued Airworthiness is indicated by a signed and dated acceptance
statement on the List of Effective Pages in the Instructions for Continued Airworthiness.

AC 27.1529A.   § 27.1529 (Amendment 27-23) INSTRUCTIONS FOR CONTINUED
            AIRWORTHINESS (MAINTENANCE MANUAL).

     a. Explanation. Amendment 91-21, 54 FR 41211, October 5, 1989, recodified
certain paragraphs in FAR Part 91. This revision corrects a reference from
FAR § 91.163 to FAR § 91.403.

     b. Procedures. Correct the references in paragraph AC 27.1529a(1) from
§§ 43.15, 43.16, and 91.163(c) to §§ 43.15, 43.16, and 91.403 of the operating rules.





Page G - 20

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →