FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-16

PDF page 729 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 729
AC 27-1B · G-16Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                           2/12/03

AC 27.1527. § 27.1527 (Amendment 27-14) MAXIMUM OPERATING ALTITUDE.

     a. Explanation. This rule requires that the maximum altitude for operation of the
rotorcraft must be established as an operating limitation. The rule is intended to
establish en route altitude as an operating limit. The requirements for maximum takeoff
and landing altitude are contained in other portions of the rule. (See discussion in
paragraph AC 27.143.) The en route limit may be established by any of the preceding
subparts of the rule involving flight, structure, powerplant, equipment or related
functional requirements of those subparts. Maximum operating altitude is ordinarily
specified initially by the manufacturer and substantiated throughout the type certification
program by each engineering discipline. Maximum operating altitude must be
established in terms of pressure altitude unless the pilot is provided with some equally
functional means of observing specified altitude limits (e.g., a density altitude indicator if
maximum altitude is specified in terms of density altitude). A related requirement in
§ 27.1583 specifies that maximum operating altitude must be established as an
operating limitation in the RFM and further that any limiting factors must be identified
and explained.

     b. Procedures. Each FAA/AUTHORITY engineering discipline must ensure that
data and testing are adequate to properly substantiate and qualify all critical
components to the maximum operating altitude of the rotorcraft. The design or
maximum substantiated altitude should be specified in the Type Inspection
Authorization. The flight test program must include at least one test flight to the
maximum approved pressure altitude. This flight should include functional testing of all
critical aircraft components. Although altitude extrapolation of performance and flying
qualities test results may be allowed, an altitude limit higher than the maximum pressure
altitude at which functional capability of critical aircraft systems has been demonstrated
by flight test should not be approved.

AC 27.1529. § 27.1529 (Amendment 27-18) INSTRUCTIONS FOR
         CONTINUED AIRWORTHINESS (MAINTENANCE MANUAL).

     a. Airworthiness Limitations Section

         (1) Explanation. The FAA/AUTHORITY has long recognized the necessity to
have a maintenance manual for rotorcraft due to the unique and generally complicated
and critical design features.

                  (i)   Amendment 27-3, in 1968, established the requirement for a specific
airworthiness limitations section. Amendment 27-18, in 1980, revised the rule and
added Appendix A containing requirements for preparation of instructions for continued
airworthiness, including the airworthiness limitations section. The operating and
maintenance rules require compliance with the airworthiness limitations section. The
maintenance rules §§ 43.15 and 43.16 and § 91.163(c) of the operating rules also refer
to or require compliance with certain parts of the instructions for continued
airworthiness. The limitations were intended to “define the limits of this type certification


Page G - 16

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →