FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-14

PDF page 727 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 727
AC 27-1B · G-14Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99

normally required and contingency duties, more complete and realistic simulation and
flight testing will be required.

         (3) Testing.

                  (i)    In the case of the minimum crew determination, the final decision is
reserved until the rotorcraft has been flown by experienced flight test pilots trained and
current in the aircraft. More assurance is derived from actual flight tests than from
earlier simulator tests or other synthetic or computer model procedures.

                   (ii)   The test program should address the workload functions and factors
listed below. For example, an evaluation of communications workload should include
the basic workload required to properly operate the aircraft in the environment for which
approval is sought. The goal is to evaluate workload with the proposed crew
complement during realistic operating conditions, including representative air traffic and
weather.

              (A) Basic workload functions. The following basic workload functions are
considered:

               (1)  Flight path control.

               (2)  Collision avoidance.

               (3) Navigation.

               (4) Communications.

               (5) Operation and monitoring of aircraft engines and systems.

               (6) Command decisions.

              (B) Workload factors. The following workload factors are considered
significant when analyzing and demonstrating workload for minimum flight crew
determination:

               (1) The accessibility, ease, and simplicity of operation of all necessary
flight, power, and equipment controls, including emergency fuel shutoff valves, electrical
controls, electronic controls, and engine controls.

               (2) The accessibility and conspicuity of all necessary instruments and
failure warning devices such as fire warning, electrical system malfunction, and other
failure or caution indicators. The extent to which such instruments or devices direct the
proper corrective action is also considered.




Page G - 14

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →