FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-2

PDF page 715 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 715
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99


               (vi)  Low Speed Flight Limitation.  It is permissible for the applicant to
establish minimum airspeed operating limitations as a function of weight, altitude, and
temperature as long as there is still a practical flight envelope.

                (vii)  VMINI (Minimum IFR Speed). The minimum speed for which
compliance with the IFR handling qualities requirements has been demonstrated should
be established as a limit for IFR operations.

                 (viii) Maximum Sideward and Rearward Flight Speed. The maximum
demonstrated sideward flight or crosswind hover and rearward flight or tailwind hover
airspeeds should be provided in the RFM.  If these maximum speeds resulted from a
control margin limitation, they should be included in the airspeed limitations section of
the RFM.  If adequate control margin remained for the critical combination of rotorcraft
configuration and ambient conditions, the maximum demonstrated sideward or rearward
flight airspeeds should be included in either the performance section or the limitations
section of the RFM as the applicant desires.

               (ix)  Maximum Airspeeds for Special Configurations or Special Equipment.
Standard configuration airspeed limits frequently have to be reduced for specific
changes or external modifications. The following are examples of special equipment or
configurations that have required additional airspeed limitations:

              (A) Doors open or doors off.

              (B) External hoist/cargo hook (stowed).

             (C) Fixed or emergency flotation gear.

             (D) External avionics equipment (large antennas, wires, etc.)

              (E) External fuel tanks.

              (F) Skid pad or ski equipment modifications to standard skid type landing
gear.

              (x)  Maximum Airspeeds after Failure of Required Equipment. Rotorcraft
that require auxiliary equipment such as stability augmentation systems to comply with
FAR requirements throughout the approved operating envelope frequently require
airspeed limitations following failure of part or all of this system in order to comply after
the failure. The following are examples of auxiliary equipment that have required
maximum airspeed limitations after failure of all or part of the system.

              (A) Stability Augmentation Systems (SAS).

              (B) Automatic Flight Control Systems (AFCS).


Page G - 2

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →