FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page B-18

PDF page 70 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 70
AC 27-1B · B-18Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     3/31/2014


          (C) The adjustments to the normal power assurance check procedures for
deteriorated engines will be influenced by the preferences of the aircraft manufacturer
and by any special stipulations of the engine certification established as a condition for
the engine to remain in service when below specification. Possibly, more stringent and
more complicated engine monitoring procedures will be introduced when allowing the
use of deteriorated power; for example, an in-flight trend monitoring program with the
associated bookkeeping duties may be required. Such an in-flight procedure must be
evaluated by flight tests as described in paragraph b.(5) above. Normally, however, the
manufacturer would be expected to present a modification, or extension of the power
assurance procedure already in place for the specification engine, which could eliminate
the need for flight test evaluation.

AC 27.45A.    § 27.45 (Amendment 27-21) GENERAL.

   a. Explanation. Amendment 27-21 adds § 27.45(f) to the regulation. This section
establishes the requirement for furnishing power assurance information for turbine
powered rotorcraft. This information is to provide the pilot a means of determining, prior
to takeoff, that each engine will produce the power necessary to achieve the
performance presented in the RFM.

   b. Procedures. All of the guidance material pertaining to AC section 27.45 remains
in effect. In addition, the power assurance information included in the RFM should be
verified. Although this requirement is normally met with a power assurance curve, other
methods of compliance may be proposed.

AC 27.45B.    § 27.45 (Amendment 27-21) GENERAL.

   a. Explanation. Although § 27.45 was not changed by Amendment 27-29, that
amendment added requirements for certification of 30-second/2-minute OEI power
ratings. For rotorcraft approved for the use of 30-second/2-minute OEI, partial power
checks currently accomplished with approved power assurance procedures for lower
power levels may not be sufficient to guarantee the ability to achieve the 30-second
power level.

   b. Procedures. MG 9 of this AC includes guidance material on power assurance
procedures to assure that the OEI power level can be achieved. All of the guidance
material pertaining to sections 27.45 and 27.45A of this AC remain in effect.

AC 27.45C. § 27.45 (Amendment 27-21) PERFORMANCE - GENERAL.

   a. Explanation. Although § 27.45 was not changed by Amendment 27-44, that
amendment added new performance and handling qualities requirements for normal
category rotorcraft. Included within these regulatory changes is OGE handling qualities.
Additionally, hover performance requirements were re-identified from § 27.73 to
§ 27.49; HV envelope requirements were re-identified from § 27.79 to § 27.87.


Page B - 18

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →