Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/12/03 AC 27-1B, Chg 1
(xiv) Possible ice shedding hazards to ground personnel or equipment in
proximity to turning rotors following flight in icing conditions should be given
consideration.
(5) Flight Manual. Areas of the flight manual which may require input are:
(i) Operating limitations including approved types of operation and
prohibiting operation in freezing rain or freezing drizzle conditions. Avoidance
procedures may also be useful.
(ii) Normal Operating Procedures. Information on the ice detection
means or system and ice protection system and their capabilities.
(iii) Emergency Operating Procedures. Operating procedures containing
essential information particularly with system failure.
(iv) Caution Notes. These caution notes should advise or address:
(A) Against inducing asymmetric shedding with rapid control inputs or
rotor speed changes, except possibly as a last resort. Rotor speed changes appear to
be more effective than control inputs in removing ice from the rotor blades of some
rotorcraft.
(B) Loss in range, climb rate, and hover capability following prolonged
operation in icing.
(C) The need for clean blade surfaces and use of approved cleaning
solvents or ground deicing/anti-icing agents prior to start of rotors turning.
(D) Changes in autorotational characteristics resulting from ice
formations.
(E) Although the rotorcraft has been certificated for flight in supercooled
clouds and falling and blowing snow, flight in other conditions such as freezing rain,
freezing drizzle, sleet, hail, and combinations of these conditions with supercooled
clouds must be avoided.
(F) The potential hazards to ground personnel, passengers deplaning,
and equipment in proximity to turning rotors following flight in icing conditions.
d. Icing References.
(1) FAA Technical Report ADS-4, Engineering Summary of Airframe Icing
Technical Data, December 1963.
Page F - 89
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.