Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 96/23/23
AC 27.1353A. § 27.1353 (AMENDMENT 27-51) ENERGY STORAGE SYSTEMS.
a. Explanation. Amendment 27-51 revised § 27.1353 to generalize the regulation to
apply to any energy storage system. Additionally, the amendment changed the section
title from “Storage battery design and installation” to “Energy storage systems.” This AC
material is updated to address lithium batteries. The guidance pertaining to lead-acid
and nickel-cadmium batteries has not changed.
(1) Electrical equipment, controls, and wiring must be installed so that operation
of any one unit or system of units will not adversely affect the simultaneous operation of
any other electrical unit or system essential to safe operation to meet the requirements
of § 27.1351. Additionally, electrical equipment, controls and wiring installation design
should be documented sufficiently to maintain configuration control for manufacturing
and to ensure that characteristics such as electromagnetic and thermal attributes
remain the same as the certification sample.
(2) The applicant should submit the results of qualification testing. Environmental
qualification of electrical equipment may be accomplished using the appropriate revision
of RTCA DO-160. Electrical equipment should be tested as installed to show there are
no adverse environmental effects on previously installed equipment and that newly
installed equipment is not adversely affected by previously installed equipment.
Potential adverse effects include, but are not limited to, electromagnetic interference or
overheating.
(3) Installed energy storage systems serve many required and non-required
rotorcraft functions. Energy storage systems vary in size, capacity, chemistry, discharge
rates, recharge rates, function, function criticality, and reliability. They supply power for
the primary electrical system architecture, backup power for required functions, and
backup power for non-required functions. Throughout the life of the aircraft, these
systems and their components will be maintained, replaced, and modified. Replacement
systems or components should be identical or all differences assessed and justified.
Replacement or system modification data should show that any changes to rotorcraft
systems and wiring remain in compliance and that functionality and reliability meet or
exceed current requirements. Capacity requirements should result from a careful and
accurate system’s load analysis. System management requirements such as electrical
load shedding should safely integrate into the overall cockpit management scheme and
not adversely affect pilot workload for any normal or emergency operation.
(4) Energy storage systems may present hazards when installed on rotorcraft.
Energy storage may be achieved by various methods and each may present different
hazards that must be addressed for installation. Hazards associated with installation of
any energy storage system should be identified and evaluated to determine any effects
on continued safe flight and landing. If required, methods should be developed to
mitigate those effects.
Page F - 62.1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.