FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 620

PDF page 620 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 620
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                      AC 27-1B, Chg 7


              (A) Ancillary navigation information (moving maps, weather displays, etc).

              (B) Secondary powerplant information, such as engine oil pressures and
temperatures.

             (C) caution advisory and warning system (CAWS) panel (unless a master
caution or warning indicator is not located in the primary FOV, in which case the CAWS
panel should be as close to the pilots primary FOV as possible).

             (D) Autopilot (if installed).

              (E) Navigation controls.

                                                         UP                              LT
     Horizontal                                            Vertical
                            30°
                                  C/L                                                Horiz



                                                         NOM
                         RT
                                                 ON

              Figure AC 27.1321-2 SECONDARY FIELDS OF VIEW


       (2) On multiengine rotorcraft, the required powerplant instruments should be
grouped so there will be no confusion regarding which engine an individual gage
represents. This is usually accomplished by mounting the engine gages in a vertical
grouping. Identical parameter gages are placed next to each other and positioned from
left to right in the same position and sequence as the engine location in the airframe.

       (3) An evaluation should be made to determine that vibration of the instrument
panel does not exceed the tolerances of the instrument. The instrument manufacturer
will usually provide data that indicate the level of vibration for which the instrument has
been qualified. The flight test evaluation of the rotorcraft should explore and determine
that the vibration of the instrument panel does not affect the readability of the
instrument. To meet these two criteria, it has been necessary in some installations to
“shock mount” or otherwise isolate the instrument panel.



                                                        Page F – 34.1

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →