Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
6/23/23 AC 27-1B, Chg 9
(iv) HAZARDOUS. Failure Conditions that would reduce the capability of the
rotorcraft or the ability of the crew to cope with adverse operating conditions to the
extent that there would be:
(A) A large reduction in safety margins or functional capabilities;
(B) Physical distress or excessive workload such that the flight crew’s
ability is impaired to where they could not be relied on to perform their tasks accurately
or completely; or
(C) Possible serious or fatal injury to a passenger or a cabin crew
member, excluding the flight crew.
Note: Hazardous Failure Conditions can include events that are manageable by the
crew by use of proper procedures which, if not implemented correctly or in a timely
manner, may result in a Catastrophic Event.
(v) CATASTROPHIC. Failure Conditions that would result in multiple
fatalities to occupants, fatalities or incapacitation to the flight crew, or loss of the
rotorcraft.
(3) Safety Objective.
(i) The objective of § 27.1309 is to ensure an acceptable safety level for
equipment and systems as installed on the rotorcraft. A logical and acceptable inverse
relationship must exist between the Average Probability per Flight Hour and the
severity of Failure Condition effects, per the requirements of § 27.1309 and as shown
in Figure AC 27.1309-1, such that:
(A) Failure Conditions with No Effect on safety may be more frequent than
Probable.
(B) Minor Failure Conditions may be Probable.
(C) Major Failure Conditions must be no more frequent than Remote.
(D) Hazardous Failure Conditions must be no more frequent than Extremely
Remote.
(E) Catastrophic Failure Conditions must be Extremely Improbable.
Page F - 30.4
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.