FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-30.2

PDF page 592 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 592
AC 27-1B · F-30.2Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

6/23/23                                             AC 27-1B, Chg 9


               (A) Section 27.1309 does not apply to the type-certificated engine.
However, it does apply to the equipment and systems associated with the engine
installation (e.g., electrical power generation, engine displays, transducers, etc.) on the
rotorcraft.

               (B) Section 27.1309 does not apply to the Rotor Drive Systems
(reference § 27.917(b)).


               (iv) Section 27, Subpart F. Section 27.1309 does not apply to the loss of
function of non-required equipment; however, it does apply to hazards introduced by the
installation of that equipment on the rotorcraft and any adverse effects on other
systems.


       (2) Background.


                   (i) This guidance describes a method of showing compliance that utilizes
the system safety assessment techniques available in the aerospace industry. The
safety assessment process described in this guidance can be adopted and applied to
equipment, systems, and installations ranging from simple systems to the most critical
and most complex systems.

                    (ii) This guidance is not intended to impose an overly rigorous safety
assessment process for those installations involving equipment or systems that are not
considered to be complex.


Note: A system is considered to be complex when its operation, failure modes, or failure
effects are difficult to comprehend without the aid of analytical methods.


    c.  Procedures.


       (1) Definitions of Probability Classifications.


Note: the following terms were derived from Table 1 – “Failure Conditions Severity as
Related to Probability Objectives and Assurance Levels” of SAE ARP 4761.


               (i) FREQUENT. The occurrence of any frequent event may be no more often
than 10 3 times during the operational life of each rotorcraft.


                             Page F - 30.2

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →