FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-12

PDF page 572 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 572
AC 27-1B · F-12Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99


AC 27.1307 § 27.1307 MISCELLANEOUS EQUIPMENT.

        a. Explanation. This rule provides a listing of several items of required
 miscellaneous equipment. Each item seems to be self-explanatory except the one
 requiring a master switch arrangement. The purpose of a master switch arrangement is
 to allow rapid removal of sources of electrical power from the rotorcraft in an emergency
 situation.

        b. Procedures. When reviewing possible solutions to the master switch
arrangement requirement, the following considerations should be included.

               (1) System separation. Since wiring from each electrical system will be
 brought in close proximity to each other, extra care should be taken to maintain some
 separation. As examples, common connectors, common grounds, and common wire
 routing should be avoided.

          (2) Installation of switches. A single switch should be avoided since it
 introduces the possibility of a single failure turning off the entire electrical system. One
 solution that is commonly used provides a close grouping of the switches such that the
 pilot can easily reach all switches and turn them all off with one action. This solution
 requires a cockpit evaluation to ensure the installation will be suitable for different hand
 sizes. Another solution involves a gang bar that can be moved with a single motion to
 turn off all sources. This solution has been found to be acceptable in several
 instances. Other solutions should be evaluated on their own merits, and the primary
emphasis should be on maintaining some minimum system separation and conducting
a cockpit evaluation by flight test personnel.





Page F - 12

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →