FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 57

PDF page 57 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 57
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

3/31/2014                                      AC 27-1B, Chg 4


      c.  Ballast Loading and Type.

         (1) Ballast loading of the rotorcraft can be accomplished in any manner to
achieve a specific CG location.  It is acceptable for such ballast to be mounted outside
the physical confines of the rotorcraft if the flight test objectives are not affected by this
arrangement. In flight test work, loading problems will occasionally be encountered in
which it will be difficult to obtain the desired CG limits. Such cases may require loading
in engine compartments or other places not designed for load carrying. When this
condition is necessary, care should be taken to ensure that local structural stresses are
not exceeded or that the rotorcraft flight characteristics are not changed due to
increased moments of inertia by attaching the ballast to extreme CG locations which
may not be designed for the added weight.

         (2) The two types of ballasts that may be used in loading are solid or liquid.
The solids are usually high density materials such as lead while the liquid usually used
is water. In critical tests, the ballast may be loaded in a manner so that disposal in flight
can be accomplished. In any case, the load should be securely attached in its loaded
position so shifting or interference with safety of flight will not result.
not result.





                                                        Page B – 6.1

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →