FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page E-119

PDF page 539 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 539
AC 27-1B · E-119Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B


AC 27.1143A.   § 27.1143 (Amendment 27-23) ENGINE CONTROLS.

     a. Explanation. Amendment 27-23 revises § 27.1143 by replacing the terms
“throttle control” and “thrust control” with the more general term “power control.” The
changes should preclude misconceptions regarding engine control arrangements when
governor-controlled turboshaft engines are employed in rotorcraft.

     b. Procedures.

         (1) Proper operation of the power control functions should be verified as part of
the Type Inspection Authorization (TIA).

         (2) Compliance with § 27.1143(d)(1) has been shown successfully in the past
by using idle detentes (mechanical or electrical/mechanical, such as a solenoid).

         (3) Compliance with § 27.1143(d)(2) has been achieved by using a switch or
button to displace the idle stop. Distinct offsets in throttle motion to allow movement
from the idle stop to shutoff have also been used to show compliance.

AC 27.1143B.   § 27.1143 (Amendment 27-29) ENGINE CONTROLS.

     a. Explanation. Amendment 27-29 introduced the option of using
30-second/2-minute OEI power ratings to multiengine rotorcraft. This amendment
revises § 27.1143 by adding the requirement for automatic control of 30-second OEI
limits in the new § 27.1143(e). Automatic control of the 30-second OEI limits are
required to prevent exceeding the remaining power sections OEI limits after the
precautionary shutdown of one engine. The use of 30-second OEI power must be
limited to emergency use only during flight conditions where one engine has failed or
has been shutdown for precautionary reasons. During this critical stage of flight, crew
attention should not be focused on powerplant instruments to avoid exceeding the limit.

     b. Procedures. The automatic controls used to prevent 30-second OEI limit
exceedances can be installed on the airframe or the engine. The applicant should
demonstrate that 30-second OEI limits that can affect the continued operation of the
drive system or engine such as gas generator speed, power turbine speed, measured
gas temperature, torque, etc., cannot be exceeded.  It should also be shown that these
devices do not restrict the ability to achieve the full 30-second OEI limits. The operation
of these limit devices can be demonstrated on the aircraft or if possible by using bench
tests.





                                                      Page E - 119

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →