Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
SUBPART E - POWERPLANT
INDUCTION SYSTEM
AC 27.1091. § 27.1091 (Amendment 27-2) AIR INDUCTION.
a. Explanation.
(1) The air induction system for each engine should be of a configuration to
supply the air required under the operating conditions for which certification is required.
(2) The intake system shall be designed such that if a backfire flame occurs, it
will emerge outside the engine compartment cowling.
(3) Where required in the induction system, drains must be provided which
discharge clear of the rotorcraft and out of the path of exhaust flames.
(4) For rotorcraft powered by a turbine, the inlets should be located or protected
to minimize foreign object ingestion as defined in the regulation. The inlets must be
protected during takeoff, landing, and taxiing. There must also be means to prevent
leakage of hazardous amounts of flammable fluids from entering the engine intake
system.
b. Procedures.
(1) For turbine-engine installation, the induction system should supply air of
suitable quality to meet the installation requirements of the engine manufacturers. The
installation requirements should be met throughout the operating envelope of the
rotorcraft. In addition, the design and location of the air induction system should
prevent accumulations of rain or hail, either external or internal to the induction system,
that could adversely affect engine operation.
(2) The inlet design should account for the prevention of hazardous fluids
entering the engine. Some designs will have inlet ducts which are free from any fluid
lines; however, other designs may route the engine inlet air through a compartment
which has flammable fluid lines. When the condition exists, test demonstrations of
critical leakage during operations have been used to substantiate the installation. The
fluid leakage may not have an adverse effect on engine operation.
(3) The air induction system design should also account for and minimize the
possibility of foreign matter ingestion during takeoff, landing, and taxiing.
(4) For reciprocating engine installations, the induction system should supply
air of suitable quality and quantity to the carburetor inlet of the engine. The condition of
the air at the entering face of the carburetor is extremely important. For proper
Page E - 99
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.