Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
SUBPART E - POWERPLANT
FUEL SYSTEM COMPONENTS
AC 27.991. § 27.991 FUEL PUMPS.
a. Explanation.
(1) Section 27.991(a) provides a definition of the main pump(s) and § 27.991(b)
requires an “emergency pump(s).” The main pump(s) that is certified as part of the
engine does not fall under § 27.991 requirements. The main pump(s) discussed under
§ 27.991 should therefore be considered the “main aircraft pump(s).”
(2) The main aircraft pump(s) consists of whatever pump(s) is required to meet
engine or fuel system operation throughout the range of ambient temperature, fuel
temperature, fuel pressure, altitude, and fuel types intended for the rotorcraft. If the
main aircraft pump(s) is required to meet the above criteria, then an emergency
pump(s) is required. Airframe supplied pumps intended for use during engine starting
only are not considered to be main aircraft pumps and do not require emergency
backup pumps.
b. Procedures.
(1) Each pump classified as a main aircraft pump, which is also a positive
displacement pump, must have provisions for a fuel bypass. An exception is made for
fuel injection pumps used on certain reciprocating engines and for the positive
displacement, high pressure, fuel pumps routinely used in turbine engines. The bypass
may be accomplished via internal spring check valve and fuel passage or by external
plumbing and a check valve. High capacity positive displacement pumps with internal
pressure relief and recirculation passages should be checked for overheating if they
may be expected to operate continuously at or near 100 percent recirculation.
(2) Section 27.991(b) specifies a requirement for “emergency” pumps to
provide the necessary fuel after failure of any (one) main aircraft pump. (Injection
pumps and high pressure pumps used on turbine engines are exempt.) To ensure
adequate pressure, the “emergency” pump should produce 100 percent of the engine
flow requirement. In addition, to allow for pump or fuel system deterioration or possible
filter impediments, 125 percent of takeoff flow at minimum pressure should be provided
by the “emergency” pump. As stated in this rule, the “emergency” pump must be
operated continuously or started automatically to ensure continued normal operation of
the engine. For some multiengine rotorcraft, another main aircraft pump may possibly
be used as the required “emergency” pump. In this case, the dual role of this pump
requires it to have capacity to feed all engines at the critical pressure/flow condition.
Availability of fuel flow from this backup pump must be automatic and this function
should be verified in the preflight check procedure. The flight or ground crew should be
Page E - 80
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.