FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 414

PDF page 414 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 414
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/2008                                       AC 27-1B, Chg 3

AC 27.901A.    § 27.901 (Amendment 27-23) INSTALLATION.

     a. Explanation. Amendment 27-23 changes § 27.901(b)(1) to require a
satisfactory determination that the rotorcraft can operate safely throughout adverse
environmental conditions such as high altitude and temperature extremes. This
amendment was needed to provide consistent application of the environmental
qualification aspects of the installation. This amendment also added a new paragraph
(§ 27.901(b)(5)) to require design precautions to minimize the potential for incorrect
assembly of components and equipment essential to safe operation.

     b. Procedures. All of the policy material pertaining to this section remains in effect
with the addition of design precautions. Design precautions should be taken to
minimize the possibility of improper assembly of the components essential to the safe
operation of the rotorcraft. Fluid lines, electrical connectors, control linkages, etc.,
should be designed so that they cannot be incorrectly assembled. This can be
achieved by incorporating different sizes, lengths, and types of connectors, wires, fluid
lines, and mounting methods. The applicant should perform a detailed maintenance
assessment to clearly define the maintenance requirements, reliability, and
serviceability of the drive system design. The applicant should consider all design
qualification tests and service history data, if available. A review of accident data
supports the importance of this assessment. Some applicants have utilized drive
system vibration monitoring to verify continuing safe operation of their drive system.


                [The remainder of this page intentionally left blank.]





                                                          Page E – 5

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →