Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
AC 21.31. § 21.31 TYPE DESIGN.
The regulatory basis for requiring data to define the design is contained in § 21.31.
This section is self-explanatory and broad enough in scope to give the certification staff
access to sufficient data to determine compliance with Part 27.
AC 21.33. § 21.33 INSPECTION AND TESTS.
a. Applicant Responsibility. Section 21.33 requires the applicant to:
(1) Ensure the test rotorcraft conforms to the type design. This must be
accomplished prior to presentation to the FAA/AUTHORITY for testing.
(2) Conduct all inspections and tests necessary to determine compliance with
the airworthiness and noise requirements.
b. FAA/AUTHORITY Responsibility.
(1) The design evaluation engineers should ensure that the type design is
adequate in their technical area and that the inspections and tests to be conducted are
appropriate and sufficient to show compliance with Part 27.
(2) As changes to the rotorcraft are made during the test program, the flight test
crew should ensure that the appropriate design evaluation engineer concurs with the
change and the conformity inspection of the change has been conducted.
AC 21.35 § 21.35 (Amendment 21-59) FLIGHT TESTS.
a. Explanation.
(1) This section outlines the requirements of the applicant for aircraft type
certification and should be used in conjunction with FAA Order 8110.4A, Section 5.
Section 21.35 requires, in part, that the applicant conduct sufficient flight tests to show
compliance with the flight requirements throughout the proposed flight envelope. The
results of the applicant’s flight test should be submitted to the FAA/AUTHORITY in
report form for evaluation to determine what verification flight tests the
FAA/AUTHORITY may elect to conduct. The report should conclude that in the
applicant’s opinion the test aircraft complies with the applicable certification
requirements. The FAA/AUTHORITY verification flight test should include, but not be
limited to, the critical or marginal results contained in the applicant’s flight test report.
The FAA/AUTHORITY’s role in the certification effort is not envisioned to be one of
conducting day-to-day routine flight tests with the applicant, but only to verify his results
through limited sampling. In certain tests, such as high altitude testing at a remote
mountain site, there is an advantage in conducting flight tests concurrently with the
applicant. Additionally, the FAA/AUTHORITY can provide technical flight test
Page FAR 21 - 2
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.