Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
SUBPART D - DESIGN AND CONSTRUCTION
FIRE PROTECTION
AC 27.853 § 27.853 (Amendment 27-17) COMPARTMENT INTERIORS.
a. Explanation.
(1) Crew and passenger compartments must have materials that are at least
flash resistant or flame resistant as prescribed for the application cited in the standard.
(2) Whenever smoking is allowed, self-contained, removable ashtrays must be
provided as stated. A placard or placards, if needed, may be used to prohibit smoking
at all times in the crew and passenger compartment. If smoking is allowed, illuminated
“no smoking” signs are required. The signs shall meet prescribed standards for
passenger compartments that are separate from the flightcrew. Integral crew and
passenger compartments (of smaller rotorcraft) do not require illuminated signs since
oral commands or instructions from the flightcrew are sufficient.
(3) Amendment 27-17 revised paragraph (c) of § 27.853 by adding the
standards for the “no smoking” illuminated signs that must be controllable by the
flightcrew. Amendment 29-18 added the same standards for FAR Part 29 transport
rotorcraft. The standard requires at least one illuminated sign for use in daylight as well
as night in passenger compartments that are separate from the crew compartment. The
sign shall be legible to each seated passenger. If forward and aft facing seats are
installed, signs for each seat orientation may be needed as prescribed.
Section 29.853(c) of Amendment 29-18 is the same standard as § 27.853(c) of
Amendment 27-17.
(4) Advisory Circular 23-2, Flammability Tests, August 20, 1984, provides
historical background of the regulatory standards for flash resistant, flame resistant, fire
resistant, and fireproof materials. The procedures in AC 23-2 may be used for
FAR Part 27 standards. Section 27.853 does not impose standards for mandatory use
of self-extinguishing materials. Nevertheless, the FAA/AUTHORITY encourages and
recommends use of self-extinguishing interior materials that comply with § 29.853 of
Amendment 29-17.
(5) Flammability standards for certain electrical wires or cables are specified in
§ 27.1365. See paragraph AC 27.1365 for information about electrical wires.
b. Procedures.
(1) Aircraft interior materials including consoles, cabinets, etc., are subject to
the standards.
Page D - 98
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.