Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
AC 27.833. § 27.833 (Amendment 27-23) HEATERS.
a. Explanation.
(1) Amendment 27-23 added § 27.833 for combustion heaters which is derived
from the lead-in paragraph of § 27.859(c) which relates to the fire protection
requirements for fuel heaters. Section 27.833 was needed to facilitate the extensive
changes made to § 27.859 and to achieve parallel rule construction with Part 29. This
will ensure that all combustion heaters will be approved whether as a part of the type
design or as a TSO approved combustion heater.
(2) Section 27.833 requires that each combustion heater be approved. The
standard contains no provisions regarding functioning of the system, environmental
considerations, or malfunctions; therefore, the provisions of §§ 27.1301 and 27.1309
should be used to evaluate those aspects of an installation. The ventilation provisions
of § 27.831 should be considered as well as the fire protection and installation
provisions of § 27.859.
b. Procedures.
(1) Technical Standard Order, TSO-C20, was issued June 15, 1949, and
amended on April 16, 1951, and concerns combustion heaters. If a heater chosen for
installation is qualified to the provisions of TSO-C20, it may be approved. If a unit is not
TSO qualified, a qualification program for the heater itself in conjunction with the
installation should be established. This program under the type design change
procedures should be equal or equivalent to provisions of the TSO-C20.
(2) The TSO refers to the SAE Aeronautical Standard, AS 143B, which
specifies the use of certain additional devices, design features, air supply
considerations, performance tests, safety controls, environmental considerations, and
so forth. Compliance with all of the provisions of the Aeronautical Standard should
result in an approved unit; however, it will not necessarily result in a satisfactory
installation. For environmental considerations, an environmental spectrum more
suitable to rotorcraft may be used by referring to the latest version of Document
No. RTCA/DO-160, Environmental Conditions and Test Procedures for Airborne
Equipment, rather than the older AS 143B. Similarly, other specifications may also be
satisfactory for compliance with the standard.
(3) The heater system installation evaluation should also consider functioning
of the system based upon the provisions of § 27.1301 (see paragraph AC 27.1301).
Section 27.1309(a) is the regulatory basis for also considering environmental conditions
(see paragraph AC 27.1309). The expected environmental conditions resulting from the
particular rotorcraft installation should be compared to those specified in the TSO. If the
conditions derived for § 27.1309 are not met, additional environmental considerations
are appropriate. The provisions of § 27.1309(b) should be used to evaluate the
possible malfunctions of the installed system. Such an evaluation should be
Page D - 96
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.