Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
(3) This system becomes more significant when engine bleed air is used for
conditioning of the passenger and crew compartment’s air. Certain data are necessary
in order to analyze properly the bleed air provided under normal and malfunction
conditions. The airframe manufacturer can normally look to the engine manufacturer for
a specification of the maximum amount of air that can be extracted and the temperature
of the extracted air. The engine manufacturer also normally provides a failure analysis
that identifies ways the bleed air can be contaminated and the associated oil flow rates
under each failure condition. The oil manufacturers are in a position to provide
information regarding breakdown of the oil under different temperature conditions and
the impact of that breakdown on the quality of the air being provided to the passenger
and crew compartments.
b. Procedures.
(1) The passenger and crew compartments should be monitored under normal
operating conditions for the presence of carbon monoxide. A carbon monoxide test kit
is normally used for this evaluation. Air is monitored around crew stations, and outlets
and different combinations of windows closed/open, heat off/on, air-conditioner off/on,
etc., are checked to ensure all conditions are evaluated.
(2) When engine bleed air is used to condition the passenger and crew
compartment’s air, it should be initially substantiated that under normal operation, the
amount of air being extracted does not exceed the limit established by the engine
manufacturer. To accomplish this, determine the flight condition that will give the
maximum bleed air flow through the flow limiter (venturi). The flow calculations should
use this maximum flow condition and should also be made using the maximum
tolerance diameter of the venturi throat.
(3) The engine bleed air should also be evaluated under malfunction conditions
to determine a worst-case air contamination condition. (A typical worst-case
malfunction is for an oil seal to fail in the engine that allows the engine oil supply to be
introduced into the airflow.) With information regarding the contaminant, flow rate
calculations can be made to predict the contamination levels that will be reached in the
passenger and crew compartments and also the associated time duration of passenger
and crew exposure. The severity of the exposure to the contaminated air is related to
the temperature of the oil when it is introduced into the airflow. For example, synthetic
base oils manufactured to MIL-L-7808 or MIL-L-23699 begin to break down into toxic
components when the temperature exceeds 300° C (572° F). The oil manufacturers
have evaluated this problem and should be in a position to provide data regarding the
amount and type of toxic components to be expected, and the effect of introducing
those components into the passenger and crew compartments. Therefore, from
information supplied by the engine manufacturer, the worst-case air contamination
condition can be calculated, and this can be compared with results of the oil
manufacturers’ tests to determine if the concentrations are harmful or hazardous.
Page D - 95
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.