FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page D-72.2

PDF page 345 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 345
AC 27-1B · D-72.2Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     3/31/2014

AC 27.783.  § 27.783 DOORS.

     a. Explanation.

         (1) Closed cabins must have at least one external door that is adequate and
easily accessible for all of the occupants. The standard envisaged a door intended for
normal use and for an emergency exit for all passengers. The passenger compartment,
itself, should not be partitioned.

         (2) Passenger doors should not be located near main or tail rotors such that
persons using the door or doors would be endangered while entering or leaving the
aircraft. The discs of engines or other propulsion system devices were not included in
this standard. Procedures or instructions may be used to support compliance.
Section 27.1565 concerns tail rotor markings.

         (3) Cabin doors of normal category rotorcraft should inherently comply with the
exit standards in § 27.807(b) concerning the size of the unobstructed opening,
accessibility, location, method of opening, arrangement, probable jamming due to
fuselage deformation, and possibly markings inside and outside. The standards for the
features and characteristics of exits should be applied to cabin doors unless an “exit” is
also installed in the same side of the fuselage. The marking standards of § 27.1557(d)
for exits should be applied to doors unless the door is readily identified and its opening
features are simple and obvious.  It is not necessary to use red and white colors, for
exits other than emergency exits, provided the door instructions and markings are
conspicuous.

         (4) If the door is used as a “ditching emergency exit,” the threshold of the
door/exit must be above the waterline of the rotorcraft while in calm water (§ 27.807(d)).
Note that “ditching approval” under § 27.801 is an optional standard.

         (5) If a lock is used as an optional feature, the lock must not engage
inadvertently or, as a result of mechanical failure, prevent possible opening of the door
from inside or outside the cabin.

         (6) If the door is a sliding door and intended to be opened and closed in flight,
the sliding mechanism should positively attach the door to the airframe (e.g., sliding
hinge) to minimize the likelihood of the door departing the aircraft in flight. Appropriate
flight limitations should also be established to minimize any hazard while operating the
door.

                     [Section AC 27.783 continued on next page.]





Page D - 72.2

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →