Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/1999 AC 27-1B
(i) Cyclic.
Flight Control System
Switch Direction /Autopilot Configuration Aircraft Response
Forward/up basic trim nose down
airspeed/groundspeed increased airspeed
mode selected forward speed reference
vertical speed mode increased rate of
selected (without descent/decreased
airspeed mode engaged) rate of climb
hover mode selected increased ground-
speed or forward
acceleration reference
Left basic trim left wing down
heading mode selected slow heading
reference left
hover mode selected increased ground-
speed or acceleration
reference to left
(ii) Collective (assumes switch is mounted on top of grip).
Flight Control System
Switch Direction /Autopilot Configuration Aircraft Response
Forward control position hold down collective
vertical speed mode increased rate of
selected descent/decreased
rate of climb
hover mode selected decreased hover height
reference
Left control position hold increase left pedal
hover mode selected slow heading reference
left
Page D - 71
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.