FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 33

PDF page 33 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 33
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27.1B, Chg 4                                                          5/1/2014


                           FIGURES (continued)

Figure No.                       Title                                    Page

AC 27.562-7     Impulse Shape .............................................................................C-80
AC 27.562-8    Change in Velocity .......................................................................C-80
AC 27.571-1    Comparison Percent of Time in Level Flight ................................C-85
AC 27.573-1.    Schematic diagram of building block tests ...................................C102
AC 27.573-2.    Characterization of Impact Damage.............................................C-107
AC 27.573-3.    Residual Strength vs. Time ..........................................................C-112
AC 27.573-4.     Illustration of Residual Strength and Damage
                  Size Relationships for Fail-Safe Substantiation.........................C113
AC 27.621-1    Example of Casting Load Sheet Retract ......................................D-24
                   Actuator Support-Landing Gear
AC 27.621-2    Example of Castings to be Static Tested for ................................D-26
                Model XYZ
AC 27.773-1     Cockpit Visibility ...........................................................................D-67
AC 27.801-1    Sea State Code - World Meteorological.......................................D-90
                            Organization..............................................................................
AC 27.865B-1   U.S. Operational (Part 133) Rotorcraft-Load Combination...........D-116
                 Versus Applicable Cargo Type Data and Definition
              Summary
AC 27.931-1     Cantilevered Shaft, First Critical Speed .......................................E-25
AC 27.931-2     Shaft Between Support Bearings, First Critical Speed.................E-25
AC 27.952-1     Static Tension and Shear Loading Modes ...................................E-50
AC 27.952-2    Hose Assembly Tests ..................................................................E-51
AC 27.952-3    Minimum Average and Individual Loads for Hose and.................E-52
                Hose-End Fitting Combinations
AC 27.952-4     Typical Method of Breakaway Fuel Fitting Load ..........................E-53
                   Calculations
AC 27.952-5     Typical Methods of Frangible or Deformable Attachment ............E-54
                Load Calculations, Frangible Bolts
AC 27.952-6     Typical Methods of Frangible or Deformable Attachment ............E-55
                Load Calculations, Frangible Baffle
AC 27.955-1     Fuel Flow  E-61 .........................................................................E-61



Page xviii

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →