FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page D-19

PDF page 288 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 288
AC 27-1B · D-19Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B

                    INSPECTION REQUIREMENTS

              CRITICAL CASTINGS     NONCRITICAL CASTINGS
                         <(2)>           <(3)>


 CASTING
 FACTOR  FAA           OTHER    FAA          OTHER
 RANGE   REQUIRE-     CLASSIFICATI  REQUIRE-    CLASSIFICATI
   <(1)>   MENT          ON     MENT         ON
             27.621(c)                        27.621(d)

 2.01 OR        <(7)>                             <(4)>
GREATER


  1.50 TO        <(7)>                             <(5)>
   2.00


 1.250 TO    <(7)>  <(8)>                         <(6)>
   1.499


  1.00 TO      NOT        NOT         <(7)> <(8)>
   1.249    ALLOWED    ALLOWED         <(9)>



    <(1)>  Ultimate load = Casting factor x 1.5 x limit load. CAUTION: For
            casting factor range of 1.25 to 1.5 see yield test requirements of
        NOTE <(8)>. The mechanical properties to be used for analysis shall be
          based on the tabulated values of MIL-HDBK-5 or other approved sources,
               ref. § 27.613.

    <(2)>   Critical castings are those castings whose failure would preclude
           continued safe flight and landing or result in injury to any occupant, ref.
          § 27.621(c).

    <(3)>   Noncritical castings are castings other than those defined by
        NOTE <(2)>.

    <(4)>  Each casting shall receive 100 percent visual inspection.

    <(5)>  Each casting shall receive 100 percent visual and reduced magnetic
             particle or penetrant inspection or approved equivalent methods.


                                                       Page D - 19

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →