FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page C-101

PDF page 251 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 251
AC 27-1B · C-101Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

12/1/2011                                       AC 27-1B, Chg 4


should be conducted for substantiation of new structure. For the critical loading
conditions, two approaches to account for prior repeated loading or environmental
exposure for structural substantiation exist.

   •  In the first approach, the large-scale static test should be conducted on structure
       with prior repeated loading and conditioned to simulate the environmental
      exposure and then tested in that environment.

   •  The second approach relies upon coupon, element, and sub-component test
      data to assess the possible degradation of static strength after application of
      repeated loading and environmental exposure. The degradation characterized
      by these tests should then be accounted for in the static strength demonstration
       test (e.g., load enhancement), or in the analysis of these results (e.g., showing a
       positive margin of safety with allowables that include the degrading effects of
      environment and repeated load).

In practice, the two approaches may be combined to get the desired result (e.g., a
large-scale static test may be performed at a temperature with a load enhancement
factor to account for moisture absorbed over the aircraft structure’s life).

             (ii) The strength of the composite structure should be statistically established,
incrementally, through a program of analysis and tests at the coupon, element,
subcomponent, or component levels. As part of the evaluation, building block tests and
analyses at the coupon, element, or subcomponent levels can be used to address the
issues of variability, environment, structural discontinuity (e.g., joints, cut-outs or other
stress risers), damage, manufacturing defects, and design or process-specific details.
Figure AC 27.573-1 provides a conceptual schematic of tests included in the building
block approach. The material stress-strain curve should be clearly established, at least
through the ultimate design load, for each composite design. As shown in Figure AC
27.573-1, the large quantity of tests needed to provide a statistical basis comes from the
lowest levels (coupons and elements) and the performance of structural details are
validated in a lesser number of sub-component and component tests. The static
strength substantiation program should also consider all critical loading conditions for all
critical structure including residual strength and stiffness requirements after a
predetermined length of service (e.g., end of life (EOL)), which takes into account
damage and other degradation due to the service period.





                                                         Page C - 101

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →