FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page C-90

PDF page 240 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 240
AC 27-1B · C-90Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     12/1/2011


safety. In the 1980’s, more test data, analytical knowledge, and analytical methodology
became available to more completely substantiate a composite design. Current 14 CFR
parts 27 and 29 contain many sections to be considered in substantiating composite
rotorcraft structure. This advisory material provides the current or updated information
from AC 27-1B, MG 8, Amendment 27-30 to supplement the general guidance of
AC 20-107 and provides compliance guidance for the requirements of § 27.573
Amendment 27-47 for rotorcraft composite structure.

   d. Definitions. The following basic definitions are provided as a convenient reading
reference. CMH-17, and other sources, contain more complete glossaries of definitions.

      (1) A-Basis Allowable. The “A” mechanical property value is the value above
which at least 99 percent of the population of values is expected to fall, with a
confidence level of 95 percent.

      (2) Accidental Damage. Discrete damage, which may occur in service use or in
manufacturing due to impacts or collisions, such as dents, scratches, gouges,
abrasions, disbonds, splintering, and delaminations.

      (3) Active Multiple Load Path. Structure providing two or more load paths that are
all loaded during operation to a similar load spectrum.

      (4) Allowables. Both A-basis and B-basis values statistically derived and used for
a particular composite design.

      (5) As-Manufactured. Product or component that has passed the applicable
quality control process and has been found to conform to the approved design within
the allowable tolerances.

      (6) Autoclave. A closed apparatus usually equipped with variable conditions of
vacuum, pressure, and temperature.  It is used for bonding, compressing or curing
materials.

      (7) B-Basis Allowable. The “B” mechanical property value is the value above
which at least 90 percent of the population of values is expected to fall, with a
confidence level of 95 percent.

      (8) Balanced Laminate. A composite laminate in which all laminae at angles other
than 0° occur only in ± pairs (not necessarily adjacent).

      (9) Bond. The adhesion of one surface to another, with or without the use of an
adhesive as a bonding agent.

     (10) Catastrophic Failure. An event that could prevent continued safe flight and
landing.



Page C - 90

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →