FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page C-88

PDF page 238 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 238
AC 27-1B · C-88Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     12/1/2011


AC 27.573.    § 27.573 (Amendment 27-47) DAMAGE TOLERANCE AND
            FATIGUE EVALUATION OF COMPOSITE ROTORCRAFT
           STRUCTURES

   a. Purpose. This advisory material provides an acceptable means of compliance
with the provisions of § 27.573, Amendment 27-47, Title 14 of the Code of Federal
Regulations (CFR) dealing with the damage tolerance and fatigue evaluation of normal
category composite rotorcraft structures. Paragraph f.(6) specifically addresses the
advisory guidance applying to damage tolerance and fatigue evaluation as required by
§ 27.573, Amendment 27-47. Some information contained in AC 27-1B, MG 8
(Amendment 27-30) is repeated and updated, as appropriate, to preserve the “building
block” approach for analyses of composite rotorcraft structure for compliance to
§ 27.573, Amendment 27-47 . (Supplemental guidance can be found in AC 20-107,
“Composite Aircraft Structure.”) These procedures address the substantiation
requirements for composite material system constituents, composite material systems,
and composite structures common to rotorcraft. A uniform approach to composite
structural substantiation is desirable, but it is recognized that in a continually developing
technical area, which has diverse industrial roots both in aerospace and in other
industries, variations and deviations from the procedures described here may be
necessary. Deviations from this advisory material should be coordinated in advance
with the Rotorcraft Directorate.

   b. Special Considerations. Since rotorcraft structure is configured uniquely and is
inherently subjected to severe cyclic stresses, special consideration is required for the
substantiation of all rotorcraft structure, including composites. This special
consideration is necessary to ensure that the level of safety intended by the current
regulations are attained during the type certification process for all structure with special
emphasis on composite structure because of its unique structural characteristics,
manufacturing quality and operational considerations, and failure mechanisms.

   c. Background.

      (1) Historically, rotorcraft have required unique, conservative structural
substantiation because of unique configuration effects, unique loading considerations,
severe fatigue spectrum effects, and the specialized comprehensive fatigue testing
required by these effects. Rotorcraft structural static strength substantiation for both
metal and composite structure is essentially identical to that for fixed wing structure
once basic loads have been determined. However, rotorcraft structural fatigue
substantiation is significantly different from fixed wing fatigue substantiation. Since
AC 20-107, as developed, applies to both fixed wing aircraft and rotorcraft, it, of
necessity, was finalized in a broad generic form. Accordingly, a need to supplement
AC 20-107 for rotorcraft was recognized during type certification programs. One
significant difference in traditional rotorcraft fatigue substantiation programs and fixed
wing fatigue programs is the use of multiple component fatigue tests for rotorcraft
programs rather than just one full-scale test. Also, constant amplitude, accelerated load
tests are typically used rather than spectrum tests because of the high frequency loads


Page C - 88

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →