Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
(2) Pilot recognition of AFCS malfunctions. The pilot may detect an AFCS failure
condition through aircraft motion cues or by cockpit flight instruments or alerts. The specific recognition
cues will vary with specific failure type, flight condition, phase of flight, and crew duties. When evaluating
AFCS malfunctions for attentive hands-off and passive flight, it should be assumed that the flight crew is
performing cockpit duties that require it to divert their attention away from the flight instruments.
(i) Hardover. The recognition point should be that at which a pilot operating in
non-visual conditions may be expected to recognize the need to take action. Recognition of the failure
may be through the behavior of the rotorcraft or through an appropriate alerting system. Flight control
movements alone should not be used for recognition. The pilot recognition time will be the least of the
time taken for the:
(A) Rotorcraft to achieve an angular rate of change about any axis of 3° per
sec (active and attentive flight). The time taken for the rotorcraft to achieve an angular rate of change
about any axis of 5° per sec (passive flight);
(B) Rotorcraft to increase or decrease acceleration along any axis by 0.2g
(active and attentive flight). The time taken for the rotorcraft to achieve an acceleration about any axis of
0.25g (passive flight); or
(C) Relevant alert to function.
(ii) Slowover. This type of failure condition is typically recognized by a path
deviation indicated on primary flight instruments (for example, course deviation indicator (CDI), altimeter,
or vertical speed indicator). It is important that the recognition criteria are agreed upon with the FAA. The
following identify examples of recognition criteria as a function of flight phase:
(A) En-route cruise. Recognition through the altitude alerting system can be
assumed for vertical path deviation. The lateral motion of the rotorcraft may go unrecognized for a
significant period of time, unless an alerting system is installed and the slowover results in a path or
attitude deviation in excess of the limit allowed by the alerting system.
(B) Climb and descent. Recognition through increasing or decreasing
vertical speed, pitch attitude, roll attitude, or heading can be assumed.
(C) On an approach with vertical path reference. A displacement recognition
threshold should be identified and selected for testing that is appropriate for the display(s) and failure
condition(s) to be assessed.
(D) On an approach without vertical path reference. Criteria similar to the
climb or descent condition can be assumed.
Note: Credit may be taken for excessive deviation alerts, or other clear and unambiguous alerts
provided to the pilots, if available.
(iii) Oscillatory. Oscillatory failures having structural implications must be
addressed under part 27, Subpart C and § 27.1309. The flight crew is expected to disengage the
automatic control elements of the AFCS that have adverse oscillatory effects and not follow adverse
oscillatory guidance. However, if unable to disconnect some elements of the AFCS in the presence of an
oscillatory failure condition, there should be an evaluation of the long-term effects on crew workload and
the occupants.
(3) Pilot response time. Pilot response time consists of pilot recognition time and
pilot reaction time. The pilot response time is considered dependent upon the pilot attentiveness, based
upon the phase of flight and associated duties. This period commences at the time the pilot is cued to the
Page Apdx B - 7
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.